Issue 2, 2023

Enabling technologies for the continuous electrically driven conversion of CO2 and water to multi-carbon products at high current densities

Abstract

Herein, we demonstrate greatly improved conversion of CO2 using a gas diffusion electrode (GDE) with flowing electrolyte configuration for CO2 gas delivery in combination with a high surface area nickel phosphide electrocatalyst. This configuration achieves 40–50% selectivity for total carbon products over H2 formation (HER) at total current densities ranging from 50 to 300 mA cm−2. We developed a soft-templating method using CTAB detergent micelles for synthesis of phase-pure Ni2P, achieving a 260-fold larger surface area (BET) and porous sponge-like morphology that produces stable currents. This catalyst produces mainly one C-product, methylglyoxal (MG, C3H4O2) with 38–47% overall selectivity, the highest reported selectivity for a 12-electron reduction product. The versatile soft-templating method for electrocatalyst synthesis uses low-temperature (185 °C) that is permissive for incorporation of co-catalysts that are otherwise destroyed by the high temperatures used in traditional solid-state synthesis (SSS). The non-porous Ni2P-SSS catalyst produces mainly H2 at these current densities. Achieving these high currents and C/H selectivity benefits from use of hydrophobic polymers as co-catalyst binders (cationic = Nafion, anionic = PFAEM and neutral = PTFE) to improve CO2 conversion. PFAEM is the better ionomer for the CO2RR at high current density, postulated as due to suppressing CO2 conversion to inactive bicarbonate. Precipitation of the carbon products as a polycarbonate polymer occurs at high currents.

Graphical abstract: Enabling technologies for the continuous electrically driven conversion of CO2 and water to multi-carbon products at high current densities

Supplementary files

Article information

Article type
Paper
Submitted
19 окт 2022
Accepted
25 ное 2022
First published
19 дек 2022

J. Mater. Chem. A, 2023,11, 717-725

Author version available

Enabling technologies for the continuous electrically driven conversion of CO2 and water to multi-carbon products at high current densities

M. Dhiman, Y. Chen, Y. Li, A. B. Laursen, K. U. D. Calvinho, T. G. Deutsch and G. C. Dismukes, J. Mater. Chem. A, 2023, 11, 717 DOI: 10.1039/D2TA08173C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements