Issue 23, 2023

Solution processable Si/Ge heterostructure NWs enabling anode mass reduction for practical full-cell Li-ion batteries

Abstract

Here, we report the solution phase synthesis of axial heterostructure Si and Ge (hSG) nanowires (NWs). The NWs were grown in a high boiling point solvent from a low-cost Sn powder to achieve a powder form product which represents an attractive route from lab-scale to commercial application. Slurry processed anodes of the NWs were investigated in half-cell (versus Li-foil) and full-cell (versus NMC811) configurations of a lithium ion battery (LIB). The hSG NW anodes yielded capacities of 1040 mA h g−1 after 150 cycles which corresponds to a 2.8 times increase compared to a standard graphite (372 mA h g−1) anode. Given the impressive specific and areal capacities of the hSG anodes, a full-cell test against a high areal capacity NMC811 cathode was examined. In full-cell configuration, use of the hSG anode resulted in a massive anode mass reduction of 50.7% compared to a standard graphite anode. The structural evolution of the hSG NW anodes into an alloyed SiGe porous mesh network was also investigated using STEM, EDX and Raman spectroscopy as a function of cycle number to fully elucidate the lithiation/delithiation mechanism of the promising anode material.

Graphical abstract: Solution processable Si/Ge heterostructure NWs enabling anode mass reduction for practical full-cell Li-ion batteries

Supplementary files

Article information

Article type
Paper
Submitted
15 авг 2023
Accepted
27 авг 2023
First published
01 сеп 2023
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2023,5, 6514-6523

Solution processable Si/Ge heterostructure NWs enabling anode mass reduction for practical full-cell Li-ion batteries

T. E. Adegoke, S. Abdul Ahad, U. Bangert, H. Geaney and K. M. Ryan, Nanoscale Adv., 2023, 5, 6514 DOI: 10.1039/D3NA00648D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements