Issue 46, 2022

Current state of copper-based bimetallic materials for electrochemical CO2 reduction: a review

Abstract

The increasing CO2 concentration in the atmosphere has caused profound environmental issues such as global warming. The use of CO2 as a feedstock to replace traditional fossil sources holds great promise to reduce CO2 emissions. The electrochemical conversion of CO2 has attracted much attention because it can be powered by renewable sources such as solar energy. In this review article, we provide insight into the important parameters when studying CO2RR and give a comprehensive review on the description of synthesis methods with electrocatalytic CO2 reduction over bimetallic copper-based materials. Due to the important bibliographic data on Cu bimetallic materials, we have limited this review to Sn, In, Pd, Zn and Ag. At the end of this review, challenges and perspectives for further upgrading have been included to briefly highlight the important future considerations of this rapidly growing technology.

Graphical abstract: Current state of copper-based bimetallic materials for electrochemical CO2 reduction: a review

Article information

Article type
Review Article
Submitted
27 авг 2022
Accepted
13 окт 2022
First published
21 окт 2022
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2022,12, 30056-30075

Current state of copper-based bimetallic materials for electrochemical CO2 reduction: a review

O. Zoubir, L. Atourki, H. Ait Ahsaine and A. BaQais, RSC Adv., 2022, 12, 30056 DOI: 10.1039/D2RA05385C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements