Issue 23, 2022

Automated device for multi-stage paper-based assays enabled by an electroosmotic pumping valve

Abstract

We leverage electroosmotic-flow generation in porous media in combination with a hydrophobic air gap to create a controllable valve capable of operating in either finite dosing or continuous flow mode, enabling the implementation of multi-step assays on paper-based devices. The hydrophobic air gap between two paper pads creates a barrier keeping the valve nominally closed. Electroosmotic actuation, implemented using a pair of electrodes under the upstream pad, generates sufficient pressure to overcome the barrier and connect the two pads. We present a model describing the flow and governing parameters, including the electric potentials required to open and close the valve and the threshold potential for switching between the modes of operation. We construct the air gap using a hierarchical superhydrophobic surface and study the stability of the closed valve under strenuous conditions and find good agreement between our model and experimental results, as well as stable working conditions for practical applications. We present a straightforward design for a compact and automated device based on paper pads placed on top of printed circuit boards (PCB), equipped with heating and actuation electrodes and additional power and logic capabilities. Finally, we demonstrate the use of the device for amplification of SARS-CoV-2 sequences directly from raw saliva samples, using a loop-mediated isothermal amplification (LAMP) protocol requiring sample lysis followed by enzymatic deactivation and delivery to multiple amplification sites. Since PCB costs scale favorably with mass-production, we believe that this approach could lead to a low-cost diagnostic device that offers the sensitivity of amplification methods.

Graphical abstract: Automated device for multi-stage paper-based assays enabled by an electroosmotic pumping valve

Supplementary files

Article information

Article type
Paper
Submitted
24 юни 2022
Accepted
03 авг 2022
First published
04 авг 2022

Lab Chip, 2022,22, 4511-4520

Automated device for multi-stage paper-based assays enabled by an electroosmotic pumping valve

B. Rofman, R. Naddaf, M. Bar-Dolev, T. Gefen, N. Ben-Assa, N. Geva-Zatorsky and M. Bercovici, Lab Chip, 2022, 22, 4511 DOI: 10.1039/D2LC00572G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements