Issue 7, 2022

A luminescent Zn-MOF for the detection of explosives and development of fingerprints

Abstract

A luminescent 3D metal–organic framework [Zn(NDA)(AMP)] = PUC1 (where, NDA = naphthalene-2,6-dicarboxylic acid and AMP = 4-aminomethyl pyridine) was synthesized under solvothermal conditions. The synthesized 3D framework was fully characterized with the help of different analytical techniques such as SCXRD, FTIR, TGA, PXRD, SEM, BET, etc. PUC1 exhibited a strong emission peak at 371 nm when excited at 290 nm and the resulting emission was efficiently quenched in the presence of various organic explosive substances like pentaerythritol tetranitrate (PETN), 2,4,6-trinitrophenyl-N-methylnitramine (Tetryl), trinitrotoluene (TNT), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and 1,3,5,7-tetranitro-1,3,5,7-tetrazoctane (HMX). PUC1 revealed highly sensitive and selective detection of PETN and Tetryl with high quenching constant values of 0.1 × 106 and 0.12 × 105 M−1 and low detection limits of 0.315 and 0.404 μM respectively. The strong luminescent properties of PUC1 lead to its successful application in the development of latent fingermarks on different non-porous surfaces using the powder dusting method. The accuracy and applicability of the synthesized material were determined by developing fingerprints by using secretions from eccrine and apocrine glands on a glass slide and various other surfaces, followed by dusting the surfaces. The results so obtained were found to be very accurate and promising.

Graphical abstract: A luminescent Zn-MOF for the detection of explosives and development of fingerprints

Supplementary files

Article information

Article type
Paper
Submitted
22 ное 2021
Accepted
04 яну 2022
First published
07 яну 2022

Anal. Methods, 2022,14, 700-707

A luminescent Zn-MOF for the detection of explosives and development of fingerprints

A. Kumar, S. C. Sahoo, S. K. Mehta, P. Soni, V. Sharma and R. Kataria, Anal. Methods, 2022, 14, 700 DOI: 10.1039/D1AY01977E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements