Issue 39, 2021

High-performance as-cast non-fullerene polymer solar cells from benzo[1,2-b:4,5-b′]difuran polymer via a rational copolymer design

Abstract

In this study, we synthesized a novel benzo[1,2-b:4,5-b′]difuran (BDF) copolymer (F13-R) by introducing ester-substituted thiophene into the PDiFPBDF-TBz (F13) backbone aiming to finely tune the molecular stacking and aggregation for non-fullerene as-cast polymer solar cell (PSC) applications. Compared with F13, F13-R displayed a slight blue-shifted absorption, a deeper highest occupied molecular orbital (HOMO) energy level of −5.60 eV, and improved intermolecular stacking. In PSCs, it is found that the as-cast F13-R : IT-4F device, which does not need any solvent additive and thermal/solvent annealing, could achieve a power conversion efficiency (PCE) of 12.2% with an open-circuit voltage (Voc) of 0.904 V, a short-circuit current density (Jsc) of 17.61 mA cm−2 and a fill factor (FF) of 76.60%. The as-cast F13-R : IT-4F device is the first PSC fabricated from low-cost BDF polymers, and its performance is among the best performances in as-cast PSCs. These results demonstrate that fine-tuning the BDF polymer structure via a copolymer design could be an efficient strategy to develop low-cost and high-performance as-cast PSCs.

Graphical abstract: High-performance as-cast non-fullerene polymer solar cells from benzo[1,2-b:4,5-b′]difuran polymer via a rational copolymer design

Supplementary files

Article information

Article type
Communication
Submitted
22 авг 2021
Accepted
08 сеп 2021
First published
09 сеп 2021

J. Mater. Chem. C, 2021,9, 13617-13624

High-performance as-cast non-fullerene polymer solar cells from benzo[1,2-b:4,5-b′]difuran polymer via a rational copolymer design

E. He, Z. Zheng, Y. Lu, F. Guo, S. Gao, G. T. Mola, L. Zhao and Y. Zhang, J. Mater. Chem. C, 2021, 9, 13617 DOI: 10.1039/D1TC03966K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements