Issue 3, 2021

Artemisinin-passivated mixed-cation perovskite films for durable flexible perovskite solar cells with over 21% efficiency

Abstract

High power conversion efficiencies (PCEs) surpassing 20% have been achieved on flexible single-junction perovskite solar cells recently. However, improvements of the open-circuit voltage (VOC) and fill factor (FF), limited by the nonradiative recombination, and the device durability are needed to boost the practical performance further. Herein, we report the use of artemisinin, an herb extract, to passivate the perovskite grains to improve the VOC and FF of flexible PSCs significantly. The incorporation of artemisinin (0.22 mol%) in the perovskite film reduces the film's trap density and thus the nonradiative recombination effectively. As a result, a best PCE of 21.10% is achieved, comparable with state-of-art values of flexible thin-film solar cells (CIGS, CdTe, etc.). VOC reaches 1.126 V, corresponding to a VOC loss of 0.437 V. Moreover, the flexible PSCs incorporated with artemisinin always exhibit excellent stabilities under different aging conditions. Strong interactions between the artemisinin molecules and the uncoordinated Pb2+ ions revealed by theoretical and experimental calculations are responsible for the suppressed formation of new deep-level trap defects, Pb clusters, upon aging.

Graphical abstract: Artemisinin-passivated mixed-cation perovskite films for durable flexible perovskite solar cells with over 21% efficiency

Supplementary files

Article information

Article type
Paper
Submitted
03 ное 2020
Accepted
11 дек 2020
First published
14 дек 2020

J. Mater. Chem. A, 2021,9, 1574-1582

Artemisinin-passivated mixed-cation perovskite films for durable flexible perovskite solar cells with over 21% efficiency

L. Yang, Q. Xiong, Y. Li, P. Gao, B. Xu, H. Lin, X. Li and T. Miyasaka, J. Mater. Chem. A, 2021, 9, 1574 DOI: 10.1039/D0TA10717D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements