Issue 41, 2021

Selective hydroxylation of aryl iodides to produce phenols under mild conditions using a supported copper catalyst

Abstract

Owing to the high activity and low-cost, copper-based catalysts are promising candidates for transforming aromatic halides to yield phenols. In this work, we report the selective hydroxylation of aromatic iodides to produce phenols using an atomically dispersed copper catalyst (Cu–ZnO–ZrO2) under mild reaction conditions. The reactions were conducted without the use of additional organic ligands, and the protection of an inert atmosphere environment is not required. The catalyst can be easily prepared, scalable, and is very efficient for a wide range of substrates. The catalytic reactions can be carried out with only 1.24 mol% Cu loading, which shows great potential in mass production.

Graphical abstract: Selective hydroxylation of aryl iodides to produce phenols under mild conditions using a supported copper catalyst

Supplementary files

Article information

Article type
Paper
Submitted
26 май 2021
Accepted
14 юли 2021
First published
21 юли 2021
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2021,11, 25348-25353

Selective hydroxylation of aryl iodides to produce phenols under mild conditions using a supported copper catalyst

L. Hao, A. Auni, G. Ding, X. Li, H. Xu, T. Li and Q. Zhang, RSC Adv., 2021, 11, 25348 DOI: 10.1039/D1RA04112F

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements