Issue 6, 2021

Non-woven materials for cloth-based face masks inserts: relationship between material properties and sub-micron aerosol filtration

Abstract

Current guidance by leading public health agencies recommends wearing a 3-layer cloth-based face mask with a middle non-woven material insert to reduce the transmission of infectious respiratory viruses like SARS-CoV-2. In this work we explore the material characteristics for a range of readily available non-woven materials and their sub-micron particle filtration efficiency (PFE), with the aim of providing evidence-based guidelines for selecting appropriate materials as inserts in cloth-based masks. We observed a wide range of ideal PFE for the tested non-woven materials, with polypropylene, Swiffer and rayon/polyester blend providing the highest PFE and breathability. Our results suggest that materials comprising loose 3D fibrous webs (e.g. flannel, Swiffer and gauze) exhibited enhanced filtration efficiency compared to compressed counterparts. Common modifications to fabrics, such as water-resistant treatment and a sewn seam were also investigated. Overall, we demonstrate that adding an appropriate non-woven material as an insert filter can significantly improve the performance of cloth-based masks, and there exist suitable cellulose-based alternatives to polypropylene.

Graphical abstract: Non-woven materials for cloth-based face masks inserts: relationship between material properties and sub-micron aerosol filtration

Supplementary files

Article information

Article type
Paper
Submitted
24 мар 2021
Accepted
12 апр 2021
First published
16 апр 2021
This article is Open Access
Creative Commons BY-NC license

Environ. Sci.: Nano, 2021,8, 1603-1613

Non-woven materials for cloth-based face masks inserts: relationship between material properties and sub-micron aerosol filtration

L. R. Crilley, A. A. Angelucci, B. Malile, C. J. Young, T. C. VandenBoer and J. I. L. Chen, Environ. Sci.: Nano, 2021, 8, 1603 DOI: 10.1039/D1EN00277E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements