Issue 24, 2020

Synthesis of micro–mesoporous CPO-27-Mg@KIT-6 composites and their test in CO2 adsorption

Abstract

In this work, we present the preparation of hybrid materials constituted by a Metal Organic Framework (type CPO-27-Mg) and a mesoporous silica (type KIT-6) which were successfully assembled through an in situ hydrothermal method. The composites were characterised by powder X-ray diffraction (PXRD), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), microscopic techniques (SEM and TEM), N2 adsorption–desorption isotherms at 77 K and CO2 adsorption at 273 K; these techniques confirmed the obtaining of hybrid materials and not simple physical mixtures. Finally, the hybrid materials were tested in the CO2 adsorption at different temperatures and from 0–10 bar of pressure, where the exposure to high relative humidity were also monitored. The CPO-27-Mg@KIT-6 (1 : 1) and (2 : 1) composites exhibited interesting values of CO2 adsorption capacity, compared with those reported in the literature. Therefore, this study opens new pathways for designing porous structured MOF-based materials with advanced gas separation performance.

Graphical abstract: Synthesis of micro–mesoporous CPO-27-Mg@KIT-6 composites and their test in CO2 adsorption

Supplementary files

Article information

Article type
Paper
Submitted
24 дек 2019
Accepted
11 фев 2020
First published
18 фев 2020

New J. Chem., 2020,44, 10056-10065

Synthesis of micro–mesoporous CPO-27-Mg@KIT-6 composites and their test in CO2 adsorption

D. Villarroel-Rocha, A. A. Godoy, C. Toncón-Leal, J. Villarroel-Rocha, M. S. Moreno, M. C. Bernini, G. E. Narda and K. Sapag, New J. Chem., 2020, 44, 10056 DOI: 10.1039/C9NJ06358G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements