Issue 2, 2019

Germagraphene as a promising anode material for lithium-ion batteries predicted from first-principles calculations

Abstract

Finding electrode materials with high capacity is a key challenge for developing lithium-ion batteries (LIBs). Graphene was once expected to be a promising candidate, but it turns out to be too inert to interact with Li. Here, by using first-principles calculations, we predict that germanium doped graphene, termed as Germagraphene, which has been achieved in a recent experiment, is a promising LIB anode material. We find that at the optimal Ge concentration, which corresponds to the chemical formula C17Ge, the specific capacity for Germagraphene can be as high as 1734 mA h g−1, over four times larger than that of graphite. We show that the material has good electrical conduction before and after Li adsorption. We also investigate the diffusion process of Li on Germagraphene, and find that the diffusion barrier is low (∼0.151 eV), implying fast Li diffusion. The calculated average intercalation potential is very low (∼0.03 V), which is beneficial for increasing the working voltage for full-cells. In addition, during the process of Li intercalation, the lattice change for the material is quite small (∼0.48%), implying a good cycling performance. These results suggest that Germagraphene could be a promising high-capacity anode material for LIBs.

Graphical abstract: Germagraphene as a promising anode material for lithium-ion batteries predicted from first-principles calculations

Supplementary files

Article information

Article type
Communication
Submitted
03 окт 2018
Accepted
28 ное 2018
First published
28 ное 2018

Nanoscale Horiz., 2019,4, 457-463

Germagraphene as a promising anode material for lithium-ion batteries predicted from first-principles calculations

J. Hu, C. Ouyang, S. A. Yang and H. Y. Yang, Nanoscale Horiz., 2019, 4, 457 DOI: 10.1039/C8NH00333E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements