Issue 5, 2019

A highly sensitive electrochemical aptasensor for detection of microcystin-LR based on a dual signal amplification strategy

Abstract

In this work, a sensitive and selective electrochemical aptasensor for determination of microcystin-LR (MC-LR) was developed based on a dual signal amplification system consisting of a novel ternary composite and horseradish peroxidase (HRP). The ternary composite was prepared by depositing gold nanoparticles (AuNPs) on molybdenum disulfide (MoS2) covered TiO2 nanobeads (TiONBs). MoS2 nanosheet modified TiONBs provided a large surface area for immobilization of AuNPs and biomolecules. The ternary composite also possesses an improved electron transfer and catalytic capability. To construct the aptasensor, thiolated MC-LR aptamers were immobilized on the AuNP@MoS2-TiONB modified electrode through a gold–sulfur bond. Then, biotin–cDNA with a sequence complementary to the MC-LR aptamer competed with MC-LR for binding to the immobilized aptamer. The current signal catalyzed by avidin–HRP decreased with the increase of MC-LR, based on which a linear range of 0.005–30 nM and a detection limit of 0.002 nM were obtained.

Graphical abstract: A highly sensitive electrochemical aptasensor for detection of microcystin-LR based on a dual signal amplification strategy

Article information

Article type
Paper
Submitted
14 окт 2018
Accepted
31 дек 2018
First published
03 яну 2019

Analyst, 2019,144, 1671-1678

A highly sensitive electrochemical aptasensor for detection of microcystin-LR based on a dual signal amplification strategy

X. Liu, Y. Tang, P. Liu, L. Yang, L. Li, Q. Zhang, Y. Zhou and Md. Z. H. Khan, Analyst, 2019, 144, 1671 DOI: 10.1039/C8AN01971A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements