Issue 14, 2018

Solution-processed broadband polymer photodetectors with a spectral response of up to 2.5 μm by a low bandgap donor–acceptor conjugated copolymer

Abstract

Photodetectors (PDs) with infrared (IR) response have extensive industrial and scientific applications. Broadband polymer PDs that operate at room temperature have drawn the greatest attention in the past years. In this study, solution-processed polymer PDs with a spectral response ranging from 350 nm to 2500 nm are reported. The low bandgap donor–acceptor (D–A) conjugated copolymer contributes to the IR photo-response. Implementation of a bulk heterojunction device structure with polypyrrole as an interfacial layer to match the energy level of the low bandgap D–A conjugated copolymer and the Ba/Al bi-cathode to compress dark current gave rise to a large photocurrent to dark current ratio, which resulted in detectivities greater than 1011 Jones (1 Jones = 1 cm Hz1/2 W−1) at wavelengths ranging from 350 nm to 2500 nm. Thus, our finding of utilization of bulk heterojunction composite consisting of a D–A low bandgap polymer blended with a fullerene derivative provides a facile way to detect IR radiation, indicating that broadband polymer PDs are promising for photoelectronic technology in the future.

Graphical abstract: Solution-processed broadband polymer photodetectors with a spectral response of up to 2.5 μm by a low bandgap donor–acceptor conjugated copolymer

Article information

Article type
Paper
Submitted
27 яну 2018
Accepted
12 мар 2018
First published
12 мар 2018

J. Mater. Chem. C, 2018,6, 3634-3641

Author version available

Solution-processed broadband polymer photodetectors with a spectral response of up to 2.5 μm by a low bandgap donor–acceptor conjugated copolymer

L. Zheng, T. Zhu, W. Xu, L. Liu, J. Zheng, X. Gong and F. Wudl, J. Mater. Chem. C, 2018, 6, 3634 DOI: 10.1039/C8TC00437D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements