Issue 66, 2016

Photoelectrochemical detection performance and mechanism discussion of Bi2O3 modified TiO2 nanotube arrays

Abstract

Bi2O3 were deposited on anodized TiO2 nanotube arrays by chemical bath deposition combined with calcination. The structures, elemental compositions and morphologies of the products were investigated by X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy and high resolution transmission electron microscopy respectively. The photoelectrochemical behaviors of TiO2 and Bi2O3/TiO2 NTAs were measured by cyclic votammetry and amperometry combined with a UV LED source. Modification of Bi2O3 on TiO2 nanotube arrays was found to decrease the photocurrent in buffer solution and increase the current response to organics addition at the same time, both of which are benefit for photoelectrochemical detection of organic compounds with high sensitivities. The mechanisms of Bi2O3 modification were further studied by analyzing the whole photoelectrochemical processes, including the optical absorption, charges transfer and surface electrochemical reactions. The photoelectrochemical COD sensor based on the optimized Bi2O3/TiO2 NTAs can achieve the detection performances with sensitivity of 1.8033 μA (mg L−1)−1 and COD range of 0–288 mg L−1.

Graphical abstract: Photoelectrochemical detection performance and mechanism discussion of Bi2O3 modified TiO2 nanotube arrays

Article information

Article type
Paper
Submitted
29 апр 2016
Accepted
20 юни 2016
First published
20 юни 2016

RSC Adv., 2016,6, 61367-61377

Photoelectrochemical detection performance and mechanism discussion of Bi2O3 modified TiO2 nanotube arrays

Y. Pang, G. Xu, C. Fan, J. Lv, J. Liu and Y. Wu, RSC Adv., 2016, 6, 61367 DOI: 10.1039/C6RA11074F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements