Issue 24, 2016

Understanding the Zr and Si interdispersion in Zr1−xSixO2 mesoporous thin films by using FTIR and XANES spectroscopy

Abstract

Zr–Si mixed mesoporous oxides were obtained in a wide range of proportions, from 0 to 30% and from 70 to 100% of Si, using Si(OEt)4 and ZrCl4 as precursors and Pluronic F127 as a template. The oxide mesostructure was characterized by transmission electron microscopy and 2D-small angle X-ray scattering. Fourier transform infrared spectroscopy measurements suggested a local homogeneous interdispersion of both cations. Further selective studies using X-ray Absorption Near Edge Structure (XANES) spectroscopy for separately Zr and Si local environments, allowed for demonstrating that the Zr coordination varies from close to 7 to 6, when its concentration in the mixed oxide is reduced. In addition, it was possible to determine that in mixed oxides with low Zr concentrations, Zr can fit into the spaces occupied by Si in SiO2 pure oxide. An equivalent XANES result was obtained for Si, which is also compatible with the information obtained by FTIR. Furthermore, the Zr–O distance varied from close to 2.2 Å to 1.7 Å when the Zr concentration decreased. Finally, our study also demonstrates the usefulness of XANES to selectively assess the local structure (coordination, symmetry and chemical state) of specific atoms in nanostructured systems.

Graphical abstract: Understanding the Zr and Si interdispersion in Zr1−xSixO2 mesoporous thin films by using FTIR and XANES spectroscopy

Supplementary files

Article information

Article type
Paper
Submitted
15 яну 2016
Accepted
03 мар 2016
First published
07 мар 2016

Dalton Trans., 2016,45, 9977-9987

Understanding the Zr and Si interdispersion in Zr1−xSixO2 mesoporous thin films by using FTIR and XANES spectroscopy

L. Andrini, P. C. Angelomé, G. J. A. A. Soler-Illia and F. G. Requejo, Dalton Trans., 2016, 45, 9977 DOI: 10.1039/C6DT00203J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements