Issue 8, 2016

Assessing biomass catalytic pyrolysis in terms of deoxygenation pathways and energy yields for the efficient production of advanced biofuels

Abstract

The present work focuses on the pathways through which catalytic pyrolysis of biomass into bio-oil proceeds and the effect of the operation conditions on parameters like bio-oil oxygen composition and mass yield, and also additional indicators, such as the distribution of both the oxygen and the chemical energy contained in the initial biomass among the different products. Acid washed wheat straw was used as biomass feedstock. The pyrolysis tests were performed in a lab-scale downdraft fixed-bed reactor working at atmospheric pressure, employing a nanocrystalline H-ZSM-5 zeolite as catalyst. A systematic study was carried out by decoupling both the thermal and catalytic reactions in order to evaluate the influence of three key variables: temperature of the thermal zone; temperature of the subsequent catalytic step and catalyst/biomass ratio. Increasing the pyrolysis temperature in the thermal zone resulted in more bio-oil* (bio-oil in water-free basis) production to the detriment of char and water fractions. In contrast, a significant reduction in bio-oil* fraction, due to decarbonylation and decarboxylation, occurred when increasing the catalytic bed temperature from 400 up to 500 °C. A similar effect was observed by varying the catalyst/biomass ratio since it increased the production of CO, CO2, light olefins and coke at the expense of a decline in the bio-oil* yield. Nevertheless, this bio-oil contains oxygen amounting to as low as 10 wt%, while retaining about 38% of the energy yield. Char, coke and gaseous hydrocarbons contain a great part of the biomass chemical energy, hence their formation should be suppressed or minimized to further improve the bio-oil* energy yield. At high catalyst/biomass ratios, the bio-oil becomes rich in aromatic compounds, both oxygenated and hydrocarbons, while the amount of sugars, furans, carboxylic acids, and other oxygenated products is strongly reduced.

Graphical abstract: Assessing biomass catalytic pyrolysis in terms of deoxygenation pathways and energy yields for the efficient production of advanced biofuels

Article information

Article type
Paper
Submitted
08 мар 2016
Accepted
28 мар 2016
First published
29 мар 2016

Catal. Sci. Technol., 2016,6, 2829-2843

Assessing biomass catalytic pyrolysis in terms of deoxygenation pathways and energy yields for the efficient production of advanced biofuels

H. Hernando, S. Jiménez-Sánchez, J. Fermoso, P. Pizarro, J. M. Coronado and D. P. Serrano, Catal. Sci. Technol., 2016, 6, 2829 DOI: 10.1039/C6CY00522E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements