Issue 4, 2015

Self-assembled three-dimensional hierarchical graphene hybrid hydrogels with ultrathin β-MnO2 nanobelts for high performance supercapacitors

Abstract

We report a facile method to assemble a hierarchical and interconnected reduced graphene oxide/β-MnO2 (rGO/β-MnO2) nanobelt hybrid hydrogel by dispersion of presynthesized ultrathin β-MnO2 nanobelts (NBs) in graphene oxide (GO) precursor solution by a hydrothermal reaction. The microscopic structure of the three-dimensional (3D) hybrid hydrogel can be controlled by adjusting the content of the ultrathin β-MnO2 NBs, which exhibits the properties of low density, large specific surface area, and high compressive strength for the corresponding aerogel. Importantly, a typical hybrid hydrogel with 54.2% ultrathin β-MnO2 NBs displays a specific capacitance as high as 362 F g−1 at a current density of 1.0 A g−1, and even 282 F g−1 at 20 A g−1, which is three times higher than that of the pure rGO hydrogel (118 F g−1). Meanwhile, the typical hybrid hydrogel also shows outstanding cycling stability with 96.3% capacitance retention after 10 000 cycles of cyclic voltammetry (CV) scans. These findings open up the use of ultrathin NBs for the self-assembly of hybrid hydrogels as high performance supercapacitor devices in energy storage and conversion.

Graphical abstract: Self-assembled three-dimensional hierarchical graphene hybrid hydrogels with ultrathin β-MnO2 nanobelts for high performance supercapacitors

Supplementary files

Article information

Article type
Paper
Submitted
18 сеп 2014
Accepted
10 ное 2014
First published
02 дек 2014

J. Mater. Chem. A, 2015,3, 1540-1548

Self-assembled three-dimensional hierarchical graphene hybrid hydrogels with ultrathin β-MnO2 nanobelts for high performance supercapacitors

S. Zhu, H. Zhang, P. Chen, L. Nie, C. Li and S. Li, J. Mater. Chem. A, 2015, 3, 1540 DOI: 10.1039/C4TA04921G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements