Issue 41, 2015

Boosting the sensitivity of Nd3+-based luminescent nanothermometers

Abstract

Luminescence thermal sensing and deep-tissue imaging using nanomaterials operating within the first biological window (ca. 700–980 nm) are of great interest, prompted by the ever-growing demands in the fields of nanotechnology and nanomedicine. Here, we show that (Gd1−xNdx)2O3 (x = 0.009, 0.024 and 0.049) nanorods exhibit one of the highest thermal sensitivity and temperature uncertainty reported so far (1.75 ± 0.04% K−1 and 0.14 ± 0.05 K, respectively) for a nanothermometer operating in the first transparent near infrared window at temperatures in the physiological range. This sensitivity value is achieved using a common R928 photomultiplier tube that allows defining the thermometric parameter as the integrated intensity ratio between the 4F5/24I9/2 and 4F3/24I9/2 transitions (with an energy difference between the barycentres of the two transitions >1000 cm−1). Moreover, the measured sensitivity is one order of magnitude higher than the values reported so far for Nd3+-based nanothermometers enlarging, therefore, the potential of using Nd3+ ions in luminescence thermal sensing and deep-tissue imaging.

Graphical abstract: Boosting the sensitivity of Nd3+-based luminescent nanothermometers

Supplementary files

Article information

Article type
Communication
Submitted
19 авг 2015
Accepted
23 сеп 2015
First published
28 сеп 2015

Nanoscale, 2015,7, 17261-17267

Boosting the sensitivity of Nd3+-based luminescent nanothermometers

S. Balabhadra, M. L. Debasu, C. D. S. Brites, L. A. O. Nunes, O. L. Malta, J. Rocha, M. Bettinelli and L. D. Carlos, Nanoscale, 2015, 7, 17261 DOI: 10.1039/C5NR05631D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements