Issue 8, 2015

A glow discharge time-of-flight mass spectrometry (GD-TOFMS) study of the ‘hydrogen effect’ using copper, iron and titanium cathodes

Abstract

We report TOFMS investigations on the effects of hydrogen added to a dc GD argon plasma, in detail over the most likely concentration range occurring in analytical work (0–0.10% v/v), together with an overview to 0.8% v/v; typical GD-OES discharge conditions were used. Many previous studies on the effects of hydrogen in analytical GD-MS used much higher hydrogen concentrations. In this paper, we report for the first time the ‘hydrogen effect’ on relative ion signal intensities of matrices, plasma and added gas, for very low but analytically important hydrogen concentrations. We investigate the behavior of doubly charged argon ions (Ar++), dimer ions (Cu2+, Fe2+, Ti2+, Ar2+) and polyatomic ions (ArH+, CuH+, FeH+, TiH+), which can play important roles in plasma processes. We discuss the probable discharge mechanisms in order to gain a greater understanding of the fundamental processes involved in the ionization of the species observed in this study and their likely effects on analytical results. We propose a mechanism to explain the increase in the matrix signal which occurs if an argon/hydrogen mixture is used as the plasma gas.

Graphical abstract: A glow discharge time-of-flight mass spectrometry (GD-TOFMS) study of the ‘hydrogen effect’ using copper, iron and titanium cathodes

Article information

Article type
Paper
Submitted
30 мар 2015
Accepted
24 юни 2015
First published
24 юни 2015

J. Anal. At. Spectrom., 2015,30, 1774-1781

A glow discharge time-of-flight mass spectrometry (GD-TOFMS) study of the ‘hydrogen effect’ using copper, iron and titanium cathodes

S. Mushtaq, E. B. M. Steers, J. A. Whitby, P. Horvath, J. Michler and J. C. Pickering, J. Anal. At. Spectrom., 2015, 30, 1774 DOI: 10.1039/C5JA00112A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements