Issue 44, 2013

Fabrication of a layered nanostructure PEDOT:PSS/SWCNTs composite and its thermoelectric performance

Abstract

Layered nanostructure PEDOT:PSS/SWCNTs (single-walled carbon nanotubes) composites have been successfully prepared utilizing a method of two-step spin casting. SEM, FTIR and Raman were used to analysis the influence of the carbon nanotubes characteristics on the morphological, spectroscopic, electrical and thermoelectric properties of the composite materials. The layered nanostructure composites showed both improved electrical conductivity and Seebeck coefficient as compared to pure PEDOT:PSS, which could be attributed to the improvement of electron transport and phonon transport because of the bonding disruption of SO3H group with the PSS chains and the use of quantum confinement and interface effects in layered nanostructures. The maximum electrical conductivity and Seebeck coefficient of the composites reached 241 S cm−1 and 38.9 μV K−1, respectively, and the maximum power factor could be up to 21.1 μW m−1 K−2, about 4 orders of magnitude higher than the pure PEDOT:PSS. This study suggests that constructing layered nanostructure organic–inorganic composites might be a novel and effective way for improving the thermoelectric properties of conducting polymers.

Graphical abstract: Fabrication of a layered nanostructure PEDOT:PSS/SWCNTs composite and its thermoelectric performance

Article information

Article type
Paper
Submitted
15 май 2013
Accepted
16 сеп 2013
First published
16 сеп 2013

RSC Adv., 2013,3, 22065-22071

Fabrication of a layered nanostructure PEDOT:PSS/SWCNTs composite and its thermoelectric performance

H. Song, C. Liu, J. Xu, Q. Jiang and H. Shi, RSC Adv., 2013, 3, 22065 DOI: 10.1039/C3RA42414F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements