Issue 23, 2017

An enhanced Seebeck coefficient and high thermoelectric performance in p-type In and Mg co-doped Sn1−xPbxTe via the co-adjuvant effect of the resonance level and heavy hole valence band

Abstract

Recently, tin telluride (SnTe) has drawn much attention as a potential candidate for thermoelectric power generation. Herein, we report the high thermoelectric performance in SnTe achieved through a two-step design (a) reduction in lattice thermal conductivity via solid solution alloying and (b) enhancement of the Seebeck coefficient (S) via the modification of the electronic structure through co-doping. First, we demonstrate that the introduction of Pb into the position of Sn in SnTe decreases the excess of p-type carrier concentration in SnTe. Notably, the Sn0.70Pb0.30Te sample exhibits a κlatt value of ∼0.67 W m−1 K−1 at 300 K, which is close to the theoretical minimum limit of the κlatt in SnTe, which results mainly from scattering of heat carrying phonons by solid solution point defects. Secondly, we achieve an S value of 121 μV K−1 at 300 K, which increases to ∼241 μV K−1 at 710 K for In and Mg co-doped Sn0.70Pb0.30Te, which is the highest Seebeck coefficient among all the state-of-the-art SnTe based materials known so far. Indium acts as a resonant dopant, leading to a remarkable enhancement in the Seebeck coefficient mainly near room temperature, whereas Mg doping enables the valence band convergence in Sn0.70Pb0.30Te, which is confirmed by density functional theory (DFT) calculations of its electronic structure. As a result of co-doping, a remarkable enhancement in the Seebeck coefficient over a wide range of temperatures is achieved due to the synergistic effect of resonance level formation and valence band convergence. Hence, we have achieved a maximum zT of 1 at 710 K for In and Mg co-doped Sn0.70Pb0.30Te. Notably, an average zT (zTavg) of ∼0.6 is achieved in the temperature range of 300–710 K for the Sn0.655Mg0.04In0.005Pb0.30Te sample.

Graphical abstract: An enhanced Seebeck coefficient and high thermoelectric performance in p-type In and Mg co-doped Sn1−xPbxTe via the co-adjuvant effect of the resonance level and heavy hole valence band

Supplementary files

Article information

Article type
Paper
Submitted
02 яну 2017
Accepted
02 фев 2017
First published
02 фев 2017

J. Mater. Chem. C, 2017,5, 5737-5748

An enhanced Seebeck coefficient and high thermoelectric performance in p-type In and Mg co-doped Sn1−xPbxTe via the co-adjuvant effect of the resonance level and heavy hole valence band

S. Roychowdhury, U. S. Shenoy, U. V. Waghmare and K. Biswas, J. Mater. Chem. C, 2017, 5, 5737 DOI: 10.1039/C7TC00009J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements