Issue 23, 2017

Drawing in poly(ε-caprolactone) fibers: tuning mechanics, fiber dimensions and surface-modification density

Abstract

Uniaxial drawing of melt-coextruded poly(ε-caprolactone) (PCL) microfibers was investigated to understand impact on topological, mechanical, and chemical properties of the fibrous scaffolds. Fibers were uniaxially elongated up to 7-fold to observe polymer chain orientation and crystal structure. Crystallinity and orientation of crystal domains were investigated by DSC and X-ray scattering. Polymer physical properties were directly correlated to bulk fiber properties. Furthermore, the drawn fibers were modified photochemically with functionalized benzophenones. The results of these studies allowed for comparison between fiber dimension/surface area, mechanical properties, and photochemical reaction yield for surface modification. As drawing increased, the modulus and tensile strength of the fibers increased as did the surface area of the scaffolds. By contrast, increased drawing led to a decrease in the ability to undergo photochemical reaction at the polymer surface. This fundamental investigation provides a predictive framework to understand how post-processing impacts three critical parameters for coextruded fibrous biomaterial scaffolds.

Graphical abstract: Drawing in poly(ε-caprolactone) fibers: tuning mechanics, fiber dimensions and surface-modification density

Supplementary files

Article information

Article type
Paper
Submitted
09 яну 2017
Accepted
22 мар 2017
First published
29 мар 2017

J. Mater. Chem. B, 2017,5, 4499-4506

Drawing in poly(ε-caprolactone) fibers: tuning mechanics, fiber dimensions and surface-modification density

S. Kim, A. M. Jordan, L. T. J. Korley and J. K. Pokorski, J. Mater. Chem. B, 2017, 5, 4499 DOI: 10.1039/C7TB00096K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements