Issue 5, 2017

A fast and fit-for-purpose arsenic speciation method for wine and rice

Abstract

This fit-for-purpose method was designed in response to recent and proposed food standards, both international and national, that limit inorganic arsenic rather than total, organic, or individual arsenic species such as arsenite (AsIII) and arsenate (AsV). In this method, AsIII is intentionally oxidized to AsV with H2O2 during sample preparation, converting all inorganic arsenic (the sum of AsIII and AsV) to the AsV form. Arsenic species were separated in less than 2 minutes using a short, narrow bore, 5 μm chromatography column. This analysis time is 10× faster than the current FDA regulatory method. The use of O2 reaction gas with inductively coupled plasma triple quadrupole mass spectrometry (ICP-QQQ with MS/MS capability) avoided spectral interferences and dramatically increased sensitivity, allowing for low volume injections. The small injection volume and modified mobile phase composition mitigate non-spectral interferences such as carbon enhanced ionization. Furthermore, the shortened analysis time significantly increases sample throughput. Validation data from two laboratories demonstrate the method's accuracy and reproducibility of both wine and rice matrices in a single analytical batch.

Graphical abstract: A fast and fit-for-purpose arsenic speciation method for wine and rice

Article information

Article type
Technical Note
Submitted
27 яну 2017
Accepted
01 мар 2017
First published
03 мар 2017

J. Anal. At. Spectrom., 2017,32, 1031-1034

A fast and fit-for-purpose arsenic speciation method for wine and rice

P. J. Gray, C. K. Tanabe, S. E. Ebeler and J. Nelson, J. Anal. At. Spectrom., 2017, 32, 1031 DOI: 10.1039/C7JA00041C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements