Issue 17, 2015

Efficiency enhancement by defect engineering in perovskite photovoltaic cells prepared using evaporated PbI2/CH3NH3I multilayers

Abstract

We report, for the first time, on the synthesis of perovskite films by thermal annealing of evaporated lead(II) iodide (PbI2)/methylammonium iodide (CH3NH3I) multilayers. Detailed characterization of the resulting films is presented. Our work demonstrates that compact, high quality and uniform perovskite films can be grown using this technique. Optimization of the device structure was achieved by careful design of the layer thickness and the number of PbI2/CH3NH3I pairs used in the formation of the absorber layer. Utilizing additional annealing steps in a controlled atmosphere was shown to result in significant improvement in the device performance. Our experimental data indicate that O2 treatments may result in substantial reduction in the trap density of the device and thereby significant improvement in the lifetimes of the carriers. A high power conversion efficiency (PCE) of 12.5% was recorded for the champion device.

Graphical abstract: Efficiency enhancement by defect engineering in perovskite photovoltaic cells prepared using evaporated PbI2/CH3NH3I multilayers

Supplementary files

Article information

Article type
Paper
Submitted
25 сеп 2014
Accepted
30 дек 2014
First published
06 яну 2015

J. Mater. Chem. A, 2015,3, 9223-9231

Author version available

Efficiency enhancement by defect engineering in perovskite photovoltaic cells prepared using evaporated PbI2/CH3NH3I multilayers

A. Ng, Z. Ren, Q. Shen, S. H. Cheung, H. C. Gokkaya, G. Bai, J. Wang, L. Yang, S. K. So, A. B. Djurišić, W. W. Leung, J. Hao, W. K. Chan and C. Surya, J. Mater. Chem. A, 2015, 3, 9223 DOI: 10.1039/C4TA05070C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements