Issue 31, 2024

Next-generation carbon molecule sieve membranes derived from polyimides and polymers of intrinsic microporosity for key energy intensive gas separations and carbon capture

Abstract

Membrane gas separation possesses the advantages of energy-saving, simple operation, environmental friendliness, and economic efficiency compared to traditional separation processes. Carbon molecular sieve (CMS) membranes have attracted increasing interest due to their superior chemical resistance and thermal stability compared to polymer membranes, as well as their ability to overcome the limitations of the trade-off between permeability and selectivity commonly present in polymer membranes. Specifically, polyimides (PIs) and polymers of intrinsic microporosity (PIMs), which have the intrinsic advantages of designable structures, superior gas separation performances, and good thermal and mechanical strength, serve as excellent precursors for making CMS membranes. Although significant progress has been achieved in the study of PI- and PIM-derived CMS membranes in the past few decades, there is still a lack of systematic research on their pyrolysis protocols. Herein, the current work reviewed the research progress in PI- and PIM-derived CMS membranes in the field of CO2 separation (CO2/CH4, CO2/N2 and CO2/H2) and olefin/paraffin separation, as well as the process simulation and techno-economic analysis of CMS membrane based gas separation processes. In particular, the effect of pyrolysis protocols including pyrolysis temperature, ramping rate, pyrolysis atmosphere and soaking time on the pore structure and gas separation performance of PI- and PIM-derived CMS membranes were systematically summarized and discussed. In addition, similar to CMS membranes made via other precursors, PI and PIM precursors also play an important role in the final CMS membrane separation performance. Generally, CMS membranes fabricated from PI and PIM precursors with higher free volume exhibited better gas separation performance. Overall, PIs and PIMs have been proven to be promising candidate precursors for CMS membrane fabrication. In addition, this review also offers perspectives and future research directions for next-generation PI- and PIM-derived CMS membranes for various gas separation applications.

Graphical abstract: Next-generation carbon molecule sieve membranes derived from polyimides and polymers of intrinsic microporosity for key energy intensive gas separations and carbon capture

Supplementary files

Article information

Article type
Review Article
Submitted
30 мар 2024
Accepted
18 июн 2024
First published
19 июн 2024

J. Mater. Chem. A, 2024,12, 19806-19838

Next-generation carbon molecule sieve membranes derived from polyimides and polymers of intrinsic microporosity for key energy intensive gas separations and carbon capture

M. Deng, J. Wei, Y. Ma, Z. Qin, J. Song, L. Yang, L. Yao, W. Jiang, S. Yi, N. Li and Z. Dai, J. Mater. Chem. A, 2024, 12, 19806 DOI: 10.1039/D4TA02112F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements