Issue 45, 2023

Efficient all polymer active layers with long-range ordered 1D p–n nanoheterojunctions confirmed by TEM tomography

Abstract

Achieving precise control over the 3D morphology of the active layer in all-polymer solar cells (APSCs) is crucial for improving power conversion efficiency and stability. The ideal configuration involves a vertically aligned p–n nanoheterojunction with a 10–20 nm exciton diffusion length, but the inherent freedom of polymer chains poses challenges due to their stochastic nature. Extensive exploration of spatial analytical techniques, from molecular to macroscale levels, is also needed to reveal the polymer behavior governing the active layers. Meanwhile, halogenated solvents are used for high-efficiency APSC fabrication due to their favorable solubility with each polymer component. However, recent efforts aim to harness non-halogenated solvents, mitigating toxicity and environmental hazards. Here, we explore the generation of uniform thin film morphologies based on solution-processable crystallization-driven polymer assemblies. Pre-assembled n-type crystalline nanowires (NWs) via heating and cooling solutions of non-halogenated 1,2,4-trimethylbenzene formed very well-aligned, uniform thin film structures with well-dissolved noncrystalline p-type polymers and showed efficiency comparable to the performance of thin films prepared with chlorobenzene (CB) halogenated solvent. X-ray scattering and transmission electron microtomography confirm organized, long-range aligned one-dimensional NWs with closely interfaced p–n nanoheterojunctions through strong intra- and inter-polymeric π-stacking interactions. Notably, the resulting thin film morphology resembles that of blended film casting with CB. Significantly, the long-term stability of the crystalline NWs-based thin film morphology under light exposure surpasses that of blend films due to robust intermolecular packing in the NWs.

Graphical abstract: Efficient all polymer active layers with long-range ordered 1D p–n nanoheterojunctions confirmed by TEM tomography

Supplementary files

Article information

Article type
Paper
Submitted
20 июн 2023
Accepted
25 окт 2023
First published
25 окт 2023

Polym. Chem., 2023,14, 5040-5048

Efficient all polymer active layers with long-range ordered 1D p–n nanoheterojunctions confirmed by TEM tomography

S. Jin, J. H. Hwang, J. Park, D. H. Ryu, B. Kim, C. E. Song and E. Lee, Polym. Chem., 2023, 14, 5040 DOI: 10.1039/D3PY00718A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements