Issue 20, 2022

Numerical analysis on a catalytic pyrolysis reactor design for plastic waste upcycling using CFD modelling

Abstract

Catalytic pyrolysis technologies are a current trend to address plastic waste upcycling, offering lower energy consumption and higher value products when compared to conventional thermal pyrolysis. In this study, catalytic pyrolysis of HDPE was simulated using computational fluid dynamics (CFD) in order to analyze the physical behaviour of a designed fluidized bed reactor unit on a pilot scale. Dimensionless numbers were used for heat and mass transfer assessment to provide useful insights for the scale-up of this technology. A fluidized bed reactor configuration was selected for its effective heat/mass transfer and compatibility with ZSM-5 catalyst. Calculations were performed on a set of temperatures (300–500 °C) and feed rates (0.5–1 kg m−2 s−1) to determine the best performing conditions. Tradeoffs between conversion, production rate and heat consumption were discussed. The key results of this study indicate that a feed rate of 1 kg m−2 s−1 at 500 °C yields the best gasoline production while consuming the lowest amount of energy per kilogram of product.

Graphical abstract: Numerical analysis on a catalytic pyrolysis reactor design for plastic waste upcycling using CFD modelling

Supplementary files

Article information

Article type
Paper
Submitted
03 мар 2022
Accepted
15 апр 2022
First published
25 апр 2022
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2022,12, 12436-12445

Numerical analysis on a catalytic pyrolysis reactor design for plastic waste upcycling using CFD modelling

L. A. De la Flor-Barriga and U. F. Rodríguez-Zúñiga, RSC Adv., 2022, 12, 12436 DOI: 10.1039/D2RA01407F

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements