Issue 31, 2017

Design of a technical Mg–Al mixed oxide catalyst for the continuous manufacture of glycerol carbonate

Abstract

The availability of a heterogeneous catalyst, which contains cheap and abundant elements, has a scalable synthesis, is highly active and stable, retains its performance upon shaping into a technical form and can be operated in continuous mode, would pave the way for a more ecological and economical production of glycerol carbonate from glycerol and urea. Here, we show that a mixed oxide of Mg and Al is a promising active phase for this reaction. The solid comprises widely available and non-toxic metals, is easily obtained through the thermal decomposition of a hydrotalcite-like material and can almost match the product yield of state-of-the-art Zn-based catalysts, while displaying an outstanding resistance against leaching, which causes the rapid dissolution of the latter. In-depth characterisation uncovered that Lewis-basic centres are crucial to activate glycerol through dehydrogenation. Their concentration was maximised by optimising the composition and calcination temperature of the precursor, thus reaching up to 60% glycerol carbonate yield. Millimeter-sized extrudates featuring comparable basic properties to the powder sample, a well-developed meso- and macroporosity and high mechanical stability are obtained using a natural clay, bentonite, as a binder and thermally activating the hydrotalcite only after shaping. Upon testing in a continuous reactor under tuned conditions of temperature and pressure and in the presence of an aprotic solvent, the system attains the same glycerol yield as in the batch tests. During 100 h on stream, its activity decreases by 20% due to fouling, but can be fully restored upon burning-off of the carbonaceous deposits. This work discloses the development of a green material that exhibits high efficacy in a sustainable transformation, highlighting key parameters that should be generally taken into account in the design of an industrially relevant chemocatalytic technology.

Graphical abstract: Design of a technical Mg–Al mixed oxide catalyst for the continuous manufacture of glycerol carbonate

Supplementary files

Article information

Article type
Paper
Submitted
07 мар 2017
Accepted
11 апр 2017
First published
12 апр 2017

J. Mater. Chem. A, 2017,5, 16200-16211

Design of a technical Mg–Al mixed oxide catalyst for the continuous manufacture of glycerol carbonate

G. M. Lari, A. B. L. de Moura, L. Weimann, S. Mitchell, C. Mondelli and J. Pérez-Ramírez, J. Mater. Chem. A, 2017, 5, 16200 DOI: 10.1039/C7TA02061A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements