Issue 43, 2016

Adsorption of pure SO2 on nanoscaled graphene oxide

Abstract

Adsorption of pure SO2 is studied for the first time on graphene oxide (GO). The adsorption mechanism was found to be fundamentally different from conventional carbon materials like activated carbon or carbon fibers. It was observed that GO binds SO2 only by physisorption (ΔHads = 18.04 kJ mol−1) and still the adsorption capacity was found to be comparable to traditional adsorbents like activated carbon or carbon molecular sieves. The 2D layered morphology as well as the absence of extensive micropores well known to promote SO2 to SO3 conversion are responsible for the observed physisorption characteristics.

Graphical abstract: Adsorption of pure SO2 on nanoscaled graphene oxide

Supplementary files

Article information

Article type
Communication
Submitted
22 мар 2016
Accepted
05 апр 2016
First published
14 апр 2016

RSC Adv., 2016,6, 36834-36839

Adsorption of pure SO2 on nanoscaled graphene oxide

D. J. Babu, F. G. Kühl, S. Yadav, D. Markert, M. Bruns, M. J. Hampe and J. J. Schneider, RSC Adv., 2016, 6, 36834 DOI: 10.1039/C6RA07518E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements