Cross Reference Logo
Citations to this article as recorded by CrossRef and RSC Journals (91 citations).

Facile production of chitin from shrimp shells using a deep eutectic solvent and acetic acid
Jie Zhang, Wen-Rong Xu and Yu-Cang Zhang
RSC Adv., 2022, 12, 22631
DOI: 10.1039/D2RA03417D

Lysinol: a renewably resourced alternative to petrochemical polyamines and aminoalcohols
Pranit S. Metkar, Mark A. Scialdone and Kenneth G. Moloy
Green Chem., 2014, 16, 4575
DOI: 10.1039/C4GC01167H

“Barking” up the right tree: biorefinery from waste stream to cyclic carbonate with immobilization of CO2 for non-isocyanate polyurethanes
Heyu Chen, Prashant Chauhan and Ning Yan
Green Chem., 2020, 22, 6874
DOI: 10.1039/D0GC02285C

Crosslinkable polyesters based on monomers derived from renewable lignin
Jie Zhang, Chengcai Pang and Guolin Wu
RSC Adv., 2016, 6, 11848
DOI: 10.1039/C5RA26155D

Construction of the di(trimethylolpropane) cross linkage and the phenylnaphthalene structure coupled with selective β-O-4 bond cleavage for synthesizing lignin-based epoxy resins with a controlled glass transition temperature
Atsushi Kaiho, Daniele Mazzarella, Masamitsu Satake, Makiko Kogo, Ryo Sakai and Takashi Watanabe
Green Chem., 2016, 18, 6526
DOI: 10.1039/C6GC02211A

Synthesis and properties of a bio-based epoxy resin from 2,5-furandicarboxylic acid (FDCA)
Jun Deng, Xiaoqing Liu, Chao Li, Yanhua Jiang and Jin Zhu
RSC Adv., 2015, 5, 15930
DOI: 10.1039/C5RA00242G

Acid-Catalyzed Chitin Liquefaction in Ethylene Glycol
Yann Pierson, Xi Chen, Felix D. Bobbink, Jiaguang Zhang and Ning Yan
ACS Sustainable Chem. Eng., 2014, 2, 2081
DOI: 10.1021/sc500334b

Lignin‐based polymers via graft copolymerization
Hailing Liu and Hoyong Chung
J. Polym. Sci. Part A: Polym. Chem., 2017, 55, 3515
DOI: 10.1002/pola.28744

Starch-based reversible adhesive: Effect of off-stoichiometric ratios on transesterification vitrimer properties
Nicole Tratnik, Nicolas R. Tanguy, Daniel J. Davidson and Ning Yan
Carbohydrate Polymers, 2025, 356, 123384
DOI: 10.1016/j.carbpol.2025.123384

Epoxidation and etherification of alkaline lignin to prepare water-soluble derivatives and its performance in improvement of enzymatic hydrolysis efficiency
Changzhou Chen, Mingqiang Zhu, Mingfei Li, Yongming Fan and Run-Cang Sun
Biotechnol Biofuels, 2016, 9
DOI: 10.1186/s13068-016-0499-9

Recycling waste epoxy resin as hydrophobic coating of melamine foam for high-efficiency oil absorption
Xuehui Liu, Fei Tian, Xu Zhao, Rongcheng Du, Shimei Xu and Yu-Zhong Wang
Applied Surface Science, 2020, 529, 147151
DOI: 10.1016/j.apsusc.2020.147151

Optimization of a commercial epoxy curing cycle via DSC data kinetics modelling and TTT plot construction
Christina Kyriakou Tziamtzi and Konstantinos Chrissafis
Polymer, 2021, 230, 124091
DOI: 10.1016/j.polymer.2021.124091

Pyrolysis oil substituted epoxy resin: Improved ratio optimization and crosslinking efficiency
Yusuf Celikbag, Thomas J. Robinson, Brian K. Via, Sushil Adhikari and Maria L. Auad
J of Applied Polymer Sci, 2015, 132
DOI: 10.1002/app.42239

In Situ FBG Monitoring of a Henequen-Epoxy Biocomposite: From Manufacturing to Performance
Mauricio Torres, Ana V. Rentería-Rodríguez and Edgar A. Franco-Urquiza
Chemistry, 2022, 4, 380
DOI: 10.3390/chemistry4020028

Bio-oil-based phenol–formaldehyde resin: comparison of weight- and molar-based substitution of phenol with bio-oil
Yusuf Celikbag, Md. Nuruddin, Manik Biswas, Osei Asafu-Adjaye and Brian K. Via
Journal of Adhesion Science and Technology, 2020, 34, 2743
DOI: 10.1080/01694243.2020.1784540

Chitin and waste shrimp shells liquefaction and liquefied products/polyvinyl alcohol blend membranes
Feng-Yi Zheng, Ruisong Li, Jiadan Hu, Jie Zhang, Xudong Han, Xinrui Wang, Wen-Rong Xu and Yucang Zhang
Carbohydrate Polymers, 2019, 205, 550
DOI: 10.1016/j.carbpol.2018.10.079

Progress of novel techniques for lightweight automobile applications through innovative eco-friendly composite materials: A review
Jyoti Agarwal, Swarnalata Sahoo, Smita Mohanty and Sanjay K Nayak
Journal of Thermoplastic Composite Materials, 2020, 33, 978
DOI: 10.1177/0892705718815530

Towards phosphorylated lignin-based epoxy resins: An integrated technological route to obtain a macromonomer with enhanced thermal and potential flame-retardant properties
Danielly da Silva Costa, Leice Milla Ribeiro de Novais, Caroline Da Ros Montes D'Oca, Jéssica Fernandes Marques, Carlos Arthur Ferreira, Selma E. Mazzetto, Diego Lomonaco and Francisco Avelino
International Journal of Biological Macromolecules, 2025, 304, 140821
DOI: 10.1016/j.ijbiomac.2025.140821

Study on deformation recovery properties and shape memory mechanism of epoxy resin/SBS composite modified asphalt for crack repair
Lifang Song, Shilong Guo, Huiyun Xia, Xu Li and Yanhui Niu
Construction and Building Materials, 2025, 464, 140155
DOI: 10.1016/j.conbuildmat.2025.140155

Biobased epoxy thermosets from vanillin-derived oligomers
Maxence Fache, Arnaud Viola, Rémi Auvergne, Bernard Boutevin and Sylvain Caillol
European Polymer Journal, 2015, 68, 526
DOI: 10.1016/j.eurpolymj.2015.03.048

Recyclable, self-strengthening starch-based epoxy vitrimer facilitated by exchangeable disulfide bonds
Nicole Tratnik, Nicolas R. Tanguy and Ning Yan
Chemical Engineering Journal, 2023, 451, 138610
DOI: 10.1016/j.cej.2022.138610

Incorporation of ligno-cellulose nanofibrils and bark extractives in water-based coatings for improved wood protection
Yanhui Huang, Qiming Feng, Cuiyin Ye, Sandeep S. Nair and Ning Yan
Progress in Organic Coatings, 2020, 138, 105210
DOI: 10.1016/j.porgcoat.2019.105210

Modifying transparent silicone-epoxy hybrid coating with functionalized polysiloxanes for anti-icing applications
Katarzyna Ziętkowska, Bartłomiej Przybyszewski, Rafał Kozera, Anna Boczkowska, Malwina Liszewska, Daria Pakuła, Bogna Sztorch and Robert E. Przekop
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2025, 727, 138216
DOI: 10.1016/j.colsurfa.2025.138216

Tannic acid derived non-isocyanate polyurethane networks: Synthesis, curing kinetics, antioxidizing activity and cell viability
N. Esmaeili, M.J. Zohuriaan-Mehr, A. Salimi, M. Vafayan and W. Meyer
Thermochimica Acta, 2018, 664, 64
DOI: 10.1016/j.tca.2018.04.013

Eco-Profiling of Bio-Epoxies via Life Cycle Assessment
Adhimoolam Bakthavachalam Kousaalya, Rakesh Krishnamoorthy Iyer and Srikanth Pilla
SAE Int. J. Sust. Trans., Energy, Env., & Policy, 2020, 01, 39
DOI: 10.4271/13-01-01-0003

Synthesis of a New Phosphonate-Based Sorbent and Characterization of Its Interactions with Lanthanum (III) and Terbium (III)
Yuezhou Wei, Khalid A. M. Salih, Mohammed F. Hamza, Toyohisa Fujita, Enrique Rodríguez-Castellón and Eric Guibal
Polymers, 2021, 13, 1513
DOI: 10.3390/polym13091513

A new Modified Heterocyclic-Magnetite Chitosan Nanocomposite for Efficient Alizarin Red Dye Removal: Adsorption Analysis and Antibacterial Activity
Asmaa Abuessawy, Amr Fouda, Adel A.-H. Abdel-Rahman, Mohamed A. Hawata and Nora A. Hamad
J Polym Environ, 2024, 32, 826
DOI: 10.1007/s10924-023-03002-w

Effects of Reaction Parameters on the Glycidyl Etherification of Bark Extractives during Bioepoxy Resin Synthesis
Pei-Yu Kuo, Luizmar de Assis Barros, Mohini Sain, Jimi S. Y. Tjong and Ning Yan
ACS Sustainable Chem. Eng., 2016, 4, 1016
DOI: 10.1021/acssuschemeng.5b01098

Study of the nitroxyl radical catalyst in aerobic oxidative cleavage and functionalization of lignin model compounds
Nikhil D. Patil and Ning Yan
Catalysis Communications, 2016, 84, 155
DOI: 10.1016/j.catcom.2016.06.015

Fatty Acid Chain Combined with Cycloaliphatic Rings via Amberlyst‐15: A Promising Structure for a High Biocontent Epoxy Design
Cong Li, Xiaoxia Cai, Jonggeun Sung, Hongwang Wang, Stefan H. Bossmann and Xiuzhi Susan Sun
J. Polym. Sci. Part A: Polym. Chem., 2017, 55, 794
DOI: 10.1002/pola.28452

Kinetics of curing and thermo-degradation, antioxidizing activity, and cell viability of a tannic acid based epoxy resin: From natural waste to value-added biomaterial
N. Esmaeili, M. Vafayan, A. Salimi and M.J. Zohuriaan-Mehr
Thermochimica Acta, 2017, 655, 21
DOI: 10.1016/j.tca.2017.06.005

Application of Western red cedar (Thuja plicata) tree bark as a functional filler in pMDI wood adhesives
Heyu Chen and Ning Yan
Industrial Crops and Products, 2018, 113, 1
DOI: 10.1016/j.indcrop.2018.01.005

Novel lignin-containing high-performance adhesive for extreme environment
Heying Zhang, Ting Chen, Yao Li, Ying Han, Yanning Sun and Guangwei Sun
International Journal of Biological Macromolecules, 2020, 164, 1832
DOI: 10.1016/j.ijbiomac.2020.07.307

Synthesis and characterization of bio-polyols through the oxypropylation of bark and alkaline extracts of bark
Jason D’Souza, Ben George, Rafael Camargo and Ning Yan
Industrial Crops and Products, 2015, 76, 1
DOI: 10.1016/j.indcrop.2015.06.037

Controllability of epoxy equivalent weight and performance of hyperbranched epoxy resins
Yimei Wang, Sufang Chen, Xianchao Chen, Yanfen Lu, Menghe Miao and Daohong Zhang
Composites Part B: Engineering, 2019, 160, 615
DOI: 10.1016/j.compositesb.2018.12.103

Mechanical and thermal properties of modified Georgian and Brazilian clay infused biobased epoxy nanocomposites
Deepa Kodali, Md-Jamal Uddin, Esperidiana A.B. Moura and Vijay K. Rangari
Materials Chemistry and Physics, 2021, 257, 123821
DOI: 10.1016/j.matchemphys.2020.123821

Bioepoxy based hybrid composites from nano-fillers of chicken feather and lignocellulose Ceiba Pentandra
Sanjay Mavinkere Rangappa, Jyotishkumar Parameswaranpillai, Suchart Siengchin, Mohammad Jawaid and Togay Ozbakkaloglu
Sci Rep, 2022, 12
DOI: 10.1038/s41598-021-04386-2

From Wastes to Functions: A New Soybean Meal and Bark-Based Adhesive
Jing Luo, Ying Zhou, Qiang Gao, Jianzhang Li and Ning Yan
ACS Sustainable Chem. Eng., 2020
DOI: 10.1021/acssuschemeng.0c02413

Biobased Epoxy Nanocomposites Derived from Lignin-Based Monomers
Shou Zhao and Mahdi M. Abu-Omar
Biomacromolecules, 2015, 16, 2025
DOI: 10.1021/acs.biomac.5b00670

Biopolymers Derived from Trees as Sustainable Multifunctional Materials: A Review
Chao Liu, Pengcheng Luan, Qiang Li, Zheng Cheng, Pengyang Xiang, Detao Liu, Yi Hou, Yang Yang and Hongli Zhu
Advanced Materials, 2021, 33
DOI: 10.1002/adma.202001654

Investigation of metal xanthates as latent curing catalysts for epoxy resin via formation of in-situ metal sulfides
Tarun Chand Vagvala, Shyam Sudhir Pandey, Yuhei Ogomi, Tingly Ma and Shuzi Hayase
Inorganica Chimica Acta, 2015, 435, 292
DOI: 10.1016/j.ica.2015.07.020

Non-isocyanate polyurethane from sweet potato residual and the application in food preservation
Yumiao Yang, Hui Cao, Yankun Wang, Jianbo Zhao, Wenqiang Ren, Bin Wang, Peiyong Qin, Fuxing Chen, Yanmin Wang and Di Cai
Industrial Crops and Products, 2022, 186, 115224
DOI: 10.1016/j.indcrop.2022.115224

The effect of ethanol on hydroxyl and carbonyl groups in biopolyol produced by hydrothermal liquefaction of loblolly pine: 31P-NMR and 19F-NMR analysis
Yusuf Celikbag, Brian K. Via, Sushil Adhikari, Gisela Buschle-Diller and Maria L. Auad
Bioresource Technology, 2016, 214, 37
DOI: 10.1016/j.biortech.2016.04.066

Enhanced fire safety and mechanical properties of epoxy resin composites based on submicrometer-sized rod-structured methyl macrocyclic silsesquioxane sodium salt
Xinming Ye, Jingjing Li, Wenchao Zhang, Ye-Tang Pan, Rongjie Yang and Jiarong Li
Chemical Engineering Journal, 2021, 425, 130566
DOI: 10.1016/j.cej.2021.130566

Preparation and characterization of fast-curing powder epoxy adhesive at middle temperature
Jie Xu, Jiayao Yang, Xiaohuan Liu, Hengxu Wang, Jingjie Zhang and Shenyuan Fu
R. Soc. open sci., 2018, 5, 180566
DOI: 10.1098/rsos.180566

Curing kinetics and mechanical properties of bio-based epoxy composites comprising lignin-based epoxy resins
Fatemeh Ferdosian, Yongsheng Zhang, Zhongshun Yuan, Mark Anderson and Chunbao (Charles) Xu
European Polymer Journal, 2016, 82, 153
DOI: 10.1016/j.eurpolymj.2016.07.014

Lignin Epoxy Composites: Preparation, Morphology, and Mechanical Properties
Jiaotong Sun, Cun Wang, Jayven Chee Chuan Yeo, Du Yuan, Hui Li, Ludger P. Stubbs and Chaobin He
Macro Materials & Eng, 2016, 301, 328
DOI: 10.1002/mame.201500310

Transparent icephobic coatings using bio-based epoxy resin
Xinghua Wu, Shunli Zheng, Daniel A. Bellido-Aguilar, Vadim V. Silberschmidt and Zhong Chen
Materials & Design, 2018, 140, 516
DOI: 10.1016/j.matdes.2017.12.017

Nature-mimetic engineering of sustainable polyurethane adhesives with high bonding strength and flame retardancy
Hongyu Chen, Shicun Jin, Rui Sun, Kuang Li, Licheng Li, Zhaochuan Yu, Zixi Yu and Huining Xiao
European Polymer Journal, 2025, 236, 114145
DOI: 10.1016/j.eurpolymj.2025.114145

Recyclable, Self-Strengthening Starch-Based Epoxy Vitrimer Facilitated by Exchangeable Disulfide Bonds from Garlic
Nicole Tratnik, Nicolas Roland Tanguy and Ning Yan
SSRN Journal, 2022
DOI: 10.2139/ssrn.4124872

The Biomodified Lignin Platform: A Review
Filippo Fabbri, Sabrina Bischof, Sebastian Mayr, Sebastian Gritsch, Miguel Jimenez Bartolome, Nikolaus Schwaiger, Georg M. Guebitz and Renate Weiss
Polymers, 2023, 15, 1694
DOI: 10.3390/polym15071694

Functionalization of the active ingredients of Japanese green tea (Camellia sinensis) for the synthesis of bio-based epoxy resin
Sunita Basnet, Masaya Otsuka, Chizuru Sasaki, Chikako Asada and Yoshitoshi Nakamura
Industrial Crops and Products, 2015, 73, 63
DOI: 10.1016/j.indcrop.2015.03.091

Liquefied banana pseudo stem-based epoxy composites: Incorporation of phenol derivative and its characterization
Ruisong Li, Yucang Zhang, Zengheng Xiong, Fengyi Zheng and Fanrong Meng
Composites Part B: Engineering, 2018, 143, 28
DOI: 10.1016/j.compositesb.2018.02.003

Bio-based thermosetting epoxy foam: Tannic acid valorization toward dye-decontaminating and thermo-protecting applications
N. Esmaeili, A. Salimi, M.J. Zohuriaan-Mehr, M. Vafayan and W. Meyer
Journal of Hazardous Materials, 2018, 357, 30
DOI: 10.1016/j.jhazmat.2018.05.045

Synthesis and Characterization of Bio-oil-Based Self-Curing Epoxy Resin
Yusuf Celikbag, Shatori Meadows, Mehul Barde, Sushil Adhikari, Gisela Buschle-Diller, Maria L. Auad and Brian K. Via
Ind. Eng. Chem. Res., 2017, 56, 9389
DOI: 10.1021/acs.iecr.7b02123

Synthesis of non-phosphorylated epoxidised corn oil as a novel green flame retardant thermoset resin
Maurelio Cabo, Prabhakar M. N. and Jung-il Song
Sci Rep, 2021, 11
DOI: 10.1038/s41598-021-03274-z

Cure kinetics of exfoliated bio-based epoxy/clay nanocomposites developed from acrylated epoxidized castor oil and diglycidyl ether bisphenol A networks
Nagarjuna Reddy Paluvai, S. Mohanty and S. K. Nayak
High Performance Polymers, 2015, 27, 918
DOI: 10.1177/0954008314566052

Analysis of Preparation and Properties on Shape Memory Hydrogenated Epoxy Resin Used for Asphalt Mixtures
Biao Ma, Xueyan Zhou, Kun Wei, Yanzhen Bo and Zhanping You
Applied Sciences, 2017, 7, 523
DOI: 10.3390/app7060523

Biobased Epoxy Synthesized from a Vanillin Derivative and Its Reinforcement Using Lignin-Containing Cellulose Nanofibrils
Zhenyu Wang, Pitchaimari Gnanasekar, Sandeep Sudhakaran Nair, Ramin Farnood, Songlin Yi and Ning Yan
ACS Sustainable Chem. Eng., 2020, 8, 11215
DOI: 10.1021/acssuschemeng.0c02559

Fast Pyrolysis Bio-Oil-Based Epoxy as an Adhesive in Oriented Strand Board Production
Osei Asibe Asafu-Adjaye, Jason Street, Archana Bansode, Maria L. Auad, Maria Soledad Peresin, Sushil Adhikari, Terry Liles and Brian K. Via
Polymers, 2022, 14, 1244
DOI: 10.3390/polym14061244

Value-added Utilization of Lignin Residue from Pretreatment Process of Lignocellulosic Biomass
Jae Yeong Jung, Yumi Lee and Eun Yeol Lee
Applied Chemistry for Engineering, 2016, 27, 135
DOI: 10.14478/ace.2016.1016

Mechanical Properties of Natural-Fiber-Reinforced Biobased Epoxy Resins Manufactured by Resin Infusion Process
Mauricio Torres-Arellano, Victoria Renteria-Rodríguez and Edgar Franco-Urquiza
Polymers, 2020, 12, 2841
DOI: 10.3390/polym12122841

Applications of bark for bio-based adhesives and foams
Pei-Yu Kuo, Ning Yan, Nicole Tratnik and Jing Luo
Physical Sciences Reviews, 2018, 3
DOI: 10.1515/psr-2017-0194

A comprehensive review on bio epoxy based IPN: Synthesis, properties and applications
H. Sreehari, Venu Gopika, Jitha S. Jayan, A.S. Sethulekshmi and Appukuttan Saritha
Polymer, 2022, 252, 124950
DOI: 10.1016/j.polymer.2022.124950

Advancements in multiscale oil palm fiber composites: Manufacturing techniques, performance evaluation, and industrial applications
Vasi Uddin Siddiqui, SM Sapuan, Aliyu Isah, J. Yusuf and Abir Khan
Industrial Crops and Products, 2024, 213, 118399
DOI: 10.1016/j.indcrop.2024.118399

Lignin containing cellulose nanofibril application in pMDI wood adhesives for drastically improved gap-filling properties with robust bondline interfaces
Heyu Chen, Sandeep S. Nair, Prashant Chauhan and Ning Yan
Chemical Engineering Journal, 2019, 360, 393
DOI: 10.1016/j.cej.2018.11.222

Investigate cleavage of β-O-4 linkage in lignin model compounds by aerobic oxidation of Cα and Cγ hydroxyl groups
Nikhil D. Patil and Ning Yan
Tetrahedron Letters, 2016, 57, 3024
DOI: 10.1016/j.tetlet.2016.05.105

Engineering two nitrogen-containing polyhedral oligomeric silsesquioxanes (N-POSSs) to enhance the fire safety of epoxy resin endowed with superior thermal stability
Xinming Ye, Yu Feng, Panpan Tian, Zhimao Li, Yingchun Li, Wensheng Wang, Jie Li, Liang Qiao, Kun Wang, Wenchao Zhang, Ye-Tang Pan and Rongjie Yang
Polymer Degradation and Stability, 2022, 200, 109946
DOI: 10.1016/j.polymdegradstab.2022.109946

New bio-based polymeric thermosets synthesized by ring-opening polymerization of epoxidized soybean oil with a green curing agent
Yahua Chen, Zhenhao Xi and Ling Zhao
European Polymer Journal, 2016, 84, 435
DOI: 10.1016/j.eurpolymj.2016.08.038

H2O2-mediated tannin bio-based wood adhesive inspired by starfish structure and phenol-amine synergy
Sichen Liu, Yingchen Wu, Guanben Du, Hongxing Yang, Kelu Ni, Hang Su, Xin Ran, Xiaojian Zhou, Wei Gao and Long Yang
Industrial Crops and Products, 2022, 188, 115714
DOI: 10.1016/j.indcrop.2022.115714

Lignocellulosics as sustainable resources for production of bioplastics – A review
Malin Brodin, María Vallejos, Mihaela Tanase Opedal, María Cristina Area and Gary Chinga-Carrasco
Journal of Cleaner Production, 2017, 162, 646
DOI: 10.1016/j.jclepro.2017.05.209

Cure kinetics of modified lignosulfonate/epoxy blends
Giti Yamini, Alireza Shakeri, Mehdy Vafayan, Mohammad Jalal Zohuriaan-Mehr, Kourosh Kabiri and Mohsen Zolghadr
Thermochimica Acta, 2019, 675, 18
DOI: 10.1016/j.tca.2019.03.003

An environmentally friendly bio-based wood adhesive prepared via a green and mild method inspired by insect cuticle
Yingchen Wu, Guanben Du, Hongxing Yang, Kelu Ni, Jiafeng Yuan, Chuanyin Liu, Xin Ran, Xiaoping Tan, Wei Gao and Long Yang
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2023, 671, 131722
DOI: 10.1016/j.colsurfa.2023.131722

In situ generated silica reinforced polyvinyl alcohol/liquefied chitin biodegradable films for food packaging
Jie Zhang, Wen-Rong Xu, Yu-Cang Zhang, Xu-Dong Han, Chen Chen and Ao Chen
Carbohydrate Polymers, 2020, 238, 116182
DOI: 10.1016/j.carbpol.2020.116182

Upgrading of kraft lignin with phosphoric acid purification: A promising route for the synthesis of renewable epoxy resins
Pollyanna Mara da Silva and Vânya Márcia Duarte Pasa
Industrial Crops and Products, 2023, 204, 117202
DOI: 10.1016/j.indcrop.2023.117202

Sustainable lignin-based epoxy resins cured with aromatic and aliphatic amine curing agents: Curing kinetics and thermal properties
Fatemeh Ferdosian, Zhongshun Yuan, Mark Anderson and Chunbao (Charles) Xu
Thermochimica Acta, 2015, 618, 48
DOI: 10.1016/j.tca.2015.09.012

“Antimicrobial Activity and Heavy Metal Removal from Wastewater Using Organically Functionalized Magnetic Chitosan Sorbents.”
Nora A. Hamad, Fatma M. Salem, Adel A.-H. Abdel-Rahman and Nasser A. Hassan
Chemistry Africa, 2024, 7, 3933
DOI: 10.1007/s42250-024-01013-1

Effect of Varying Alkyl Chain Length on Thermal Decomposition Temperature of Zinc(II) Xanthates and its Impact on Curing of Epoxy Resin
Tarun Chand Vagvala, Shyam Sudhir Pandey, Suvratha Krishnamurthy and Shuzi Hayase
Zeitschrift anorg allge chemie, 2016, 642, 134
DOI: 10.1002/zaac.201500639

Analysis and Testing of Bisphenol A—Free Bio-Based Tannin Epoxy-Acrylic Adhesives
Shayesteh Jahanshahi, Antonio Pizzi, Ali Abdulkhani and Alireza Shakeri
Polymers, 2016, 8, 143
DOI: 10.3390/polym8040143

Thermal degradation of extractive-based bio-epoxy monomer and network: Kinetics and mechanism
Pei-Yu Kuo, Luizmar de Assis Barros, Yuung-Ching Sheen, Mohini Sain, Jimi S.Y. Tjong and Ning Yan
Journal of Analytical and Applied Pyrolysis, 2016, 117, 199
DOI: 10.1016/j.jaap.2015.11.014

Double-Interpenetrating-Network Lignin-based Epoxy Resin Adhesives for Resistance to Extreme Environment
Weishi Wang, Yao Li, Heying Zhang, Ting Chen, Guangwei Sun, Ying Han and Jigeng Li
Biomacromolecules, 2022, 23, 779
DOI: 10.1021/acs.biomac.1c01204

Mechanical properties and fracture behaviour of agave fibers bio-based epoxy laminates reinforced with zinc oxide
Mauricio Torres, Victoria Renteria Rodriguez, Perla Itzel Alcantara and Edgar Franco-Urquiza
Journal of Industrial Textiles, 2022, 51, 5847S
DOI: 10.1177/1528083720965689

Investigation on mechanical, thermal, and flame retardant properties of particulate SiO2 reinforced cardanol based composites
Sivalingam Thenmozhi and Salem Chandrasekaran Murugavel
Polymer Composites, 2020, 41, 1118
DOI: 10.1002/pc.25443

Bioinspired design by gecko structure and mussel chemistry for bio-based adhesive system through incorporating natural fibers
Xiaorong Liu, Kaili Wang, Qiang Gao, Wei Zhang, Wenrui Zhou, Sheldon Q. Shi, Changlei Xia and Jianzhang Li
Journal of Cleaner Production, 2019, 236, 117591
DOI: 10.1016/j.jclepro.2019.07.066

Liquefied chitin/polyvinyl alcohol based blend membranes: Preparation and characterization and antibacterial activity
Jie Zhang, Wen-Rong Xu, Yucang Zhang, Wei Li, Jiadan Hu, Fengyi Zheng and Yangtian Wu
Carbohydrate Polymers, 2018, 180, 175
DOI: 10.1016/j.carbpol.2017.10.014

Biobased Epoxidized Starch Wood Adhesives: Effect of Amylopectin and Amylose Content on Adhesion Properties
Nicole Tratnik, Pei-Yu Kuo, Nicolas R. Tanguy, Pitchaimari Gnanasekar and Ning Yan
ACS Sustainable Chem. Eng., 2020, 8, 17997
DOI: 10.1021/acssuschemeng.0c05716

Study on extraction of lignin and synthesis of lignin-based epoxy resins using ionic liquid
Changlin Miao, Zhuang Xinshu, Lingmei Yang, Huiwen Li, Pengmei Lv and Wen Luo
Biomass Conv. Bioref., 2023, 13, 1115
DOI: 10.1007/s13399-021-01295-2

Curing Behavior and Thermomechanical Performance of Bioepoxy Resin Synthesized from Vanillyl Alcohol: Effects of the Curing Agent
Zhenyu Wang, Pitchaimari Gnanasekar, Sandeep Sudhakaran Nair, Songlin Yi and Ning Yan
Polymers, 2021, 13, 2891
DOI: 10.3390/polym13172891

Application of Biobased Phenol Formaldehyde Novolac Resin Derived from Beetle Infested Lodgepole Pine Barks for Thermal Molding of Wood Composites
Ning Yan, Boya Zhang, Yong Zhao, Ramin R. Farnood and Junyou Shi
Ind. Eng. Chem. Res., 2017, 56, 6369
DOI: 10.1021/acs.iecr.7b00353

Thermal conductivity enhancement of CNT/MoS2/graphene−epoxy nanocomposites based on structural synergistic effects and interpenetrating network
Chao Ji, Changzeng Yan, Ying Wang, Shuxian Xiong, Fengrui Zhou, Yayun Li, Rong Sun and Ching-Ping Wong
Composites Part B: Engineering, 2019, 163, 363
DOI: 10.1016/j.compositesb.2018.11.005

Nanocellulose composites with enhanced interfacial compatibility and mechanical properties using a hybrid-toughened epoxy matrix
Pei-Yu Kuo, Luizmar de Assis Barros, Ning Yan, Mohini Sain, Yan Qing and Yiqiang Wu
Carbohydrate Polymers, 2017, 177, 249
DOI: 10.1016/j.carbpol.2017.08.091