Nano-bioelectronics via dip-pen nanolithography

C. D. O'Connell, M. J. Higgins, S. E. Moulton and G. G. Wallace

J. Mater. Chem. C, 2015, 3, 6431
DOI: 10.1039/C5TC00186B

An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing

D. M. Kirchmajer, R. Gorkin III and M. in het Panhuis

J. Mater. Chem. B, 2015, 3, 4105
DOI: 10.1039/C5TB00393H

Controlled single-cell deposition and patterning by highly flexible hollow cantilevers

Vincent Martinez, Csaba Forró, Serge Weydert, Mathias J. Aebersold, Harald Dermutz, Orane Guillaume-Gentil, Tomaso Zambelli, János Vörös and László Demkó

Lab Chip, 2016, 16, 1663
DOI: 10.1039/C5LC01466B

Chemical insights into bioinks for 3D printing

Laurine Valot, Jean Martinez, Ahmad Mehdi and Gilles Subra

Chem. Soc. Rev., 2019, 48, 4049
DOI: 10.1039/C7CS00718C

Recent advances in upscalable wet methods and ink formulations for printed electronics

Yana Aleeva and Bruno Pignataro

J. Mater. Chem. C, 2014, 2, 6436
DOI: 10.1039/C4TC00618F

Artificial testis: a testicular tissue extracellular matrix as a potential bio-ink for 3D printing

Zahra Bashiri, Iraj Amiri, Mazaher Gholipourmalekabadi, Reza Falak, Hamidreza Asgari, Chad B. Maki, Ali Moghaddaszadeh and Morteza Koruji

Biomater. Sci., 2021, 9, 3465
DOI: 10.1039/D0BM02209H

Recent progress in gellan gum hydrogels provided by functionalization strategies

Ana H. Bacelar, Joana Silva-Correia, Joaquim M. Oliveira and Rui L. Reis

J. Mater. Chem. B, 2016, 4, 6164
DOI: 10.1039/C6TB01488G

Mechanically strong hybrid double network hydrogels with antifouling properties

Hong Chen, Qiang Chen, Rundong Hu, Hua Wang, Bi-min Zhang Newby, Yung Chang and Jie Zheng

J. Mater. Chem. B, 2015, 3, 5426
DOI: 10.1039/C5TB00681C

Aggressive strategies for regenerating intervertebral discs: stimulus-responsive composite hydrogels from single to multiscale delivery systems

Xi-dan Gao, Xiao-bo Zhang, Rui-hao Zhang, De-chen Yu, Xiang-yi Chen, Yi-cun Hu, Lang Chen and Hai-yu Zhou

J. Mater. Chem. B, 2022, 10, 5696
DOI: 10.1039/D2TB01066F

An electrically conductive gellan gum/polyvinyl alcohol interpenetrating network hydrogel: a dual crosslinked 3D printing ink for cardiac tissue

Mohandass Pachaiyappan, Mercyjayapriya Jebakumar, Janani Radhakrishnan and Niraikulam Ayyadurai

J. Mater. Chem. B, 2025, 13, 13020
DOI: 10.1039/D5TB01462J

Printable and flexible electronics: from TFTs to bioelectronic devices

M. Magliulo, M. Y. Mulla, M. Singh, E. Macchia, A. Tiwari, L. Torsi and K. Manoli

J. Mater. Chem. C, 2015, 3, 12347
DOI: 10.1039/C5TC02737C

Pre-shear bioprinting of highly oriented porous hydrogel microfibers to construct anisotropic tissues

Lei Shao, Ruixia Hou, Yabin Zhu and Yudong Yao

Biomater. Sci., 2021, 9, 6763
DOI: 10.1039/D1BM00695A

Tissue engineering with gellan gum

L. R. Stevens, K. J. Gilmore, G. G. Wallace and M. in het Panhuis

Biomater. Sci., 2016, 4, 1276
DOI: 10.1039/C6BM00322B

Pneumatic conveying printing technique for bioprinting applications

Izabella Brand, Isabel Groß, Dege Li, Yanzhen Zhang and Anja U. Bräuer

RSC Adv., 2019, 9, 40910
DOI: 10.1039/C9RA07521F

Peptide modification of purified gellan gum

C. J. Ferris, L. R. Stevens, K. J. Gilmore, E. Mume, I. Greguric, D. M. Kirchmajer, G. G. Wallace and M. in het Panhuis

J. Mater. Chem. B, 2015, 3, 1106
DOI: 10.1039/C4TB01727G

Ink-jet printing an optimal multi-enzyme system

Yifei Zhang, Fengjiao Lyu, Jun Ge and Zheng Liu

Chem. Commun., 2014, 50, 12919
DOI: 10.1039/C4CC06158F

Chemical tailoring of gelatin to adjust its chemical and physical properties for functional bioprinting

Eva Hoch, Thomas Hirth, Günter E. M. Tovar and Kirsten Borchers

J. Mater. Chem. B, 2013, 1, 5675
DOI: 10.1039/c3tb20745e

Modified gellan gum hydrogels for tissue engineering applications

Cameron J. Ferris, Kerry J. Gilmore, Gordon G. Wallace and Marc in het Panhuis

Soft Matter, 2013, 9, 3705
DOI: 10.1039/c3sm27389j

Microvalve-based bioprinting – process, bio-inks and applications

Wei Long Ng, Jia Min Lee, Wai Yee Yeong and May Win Naing

Biomater. Sci., 2017, 5, 632
DOI: 10.1039/C6BM00861E

Multiplex cell microarrays for high-throughput screening

Ophélie I. Berthuy, Sinan K. Muldur, François Rossi, Pascal Colpo, Loïc J. Blum and Christophe A. Marquette

Lab Chip, 2016, 16, 4248
DOI: 10.1039/C6LC00831C

Direct 3D printing of freeform anisotropic bioactive structure based on shear-oriented ink system

Chenhui Yuan, Jinhong Jiang, Xinyu Zhang, Lin Gu, Xueping Wang and Lei Shao

Biofabrication, 2024, 16, 045011
DOI: 10.1088/1758-5090/ad6375

Three-Dimensional Printing of Nanomaterial Scaffolds for Complex Tissue Regeneration

Christopher M. O'Brien, Benjamin Holmes, Scott Faucett and Lijie Grace Zhang

Tissue Engineering Part B: Reviews, 2015, 21, 103
DOI: 10.1089/ten.teb.2014.0168

Electrostatic charging and deflection of droplets for drop-on-demand 3D printing within confinements

J. Plog, Y. Jiang, Y. Pan and A.L. Yarin

Additive Manufacturing, 2020, 36, 101400
DOI: 10.1016/j.addma.2020.101400

Essential steps in bioprinting: From pre- to post-bioprinting

Pallab Datta, Ananya Barui, Yang Wu, Veli Ozbolat, Kazim K. Moncal and Ibrahim T. Ozbolat

Biotechnology Advances, 2018, 36, 1481
DOI: 10.1016/j.biotechadv.2018.06.003

Enhanced gelation properties of purified gellan gum

Damian Martin Kirchmajer, Benedikt Steinhoff, Holly Warren, Ross Clark and Marc in het Panhuis

Carbohydrate Research, 2014, 388, 125
DOI: 10.1016/j.carres.2014.02.018

Extracellular Matrix/Amorphous Magnesium Phosphate Bioink for 3D Bioprinting of Craniomaxillofacial Bone Tissue

Nileshkumar Dubey, Jessica A. Ferreira, Jos Malda, Sarit B. Bhaduri and Marco C. Bottino

ACS Appl. Mater. Interfaces, 2020, 12, 23752
DOI: 10.1021/acsami.0c05311

Application of Gelatin Bioinks and Cell-Printing Technology to Enhance Cell Delivery Capability for 3D Liver Fibrosis-on-a-Chip Development

Hyungseok Lee, Jongmin Kim, Yeongjin Choi and Dong-Woo Cho

ACS Biomater. Sci. Eng., 2020, 6, 2469
DOI: 10.1021/acsbiomaterials.9b01735

Addition of Platelet-Rich Plasma to Silk Fibroin Hydrogel Bioprinting for Cartilage Regeneration

Zuxi Li, Xiao Zhang, Tao Yuan, Yi Zhang, Chunyang Luo, Jiyong Zhang, Yang Liu and Weimin Fan

Tissue Engineering Part A, 2020, 26, 886
DOI: 10.1089/ten.tea.2019.0304

3D Nano/Microfabrication Techniques and Nanobiomaterials for Neural Tissue Regeneration

Wei Zhu, Christopher O'Brien, Joseph R O'Brien and Lijie Grace Zhang

Nanomedicine, 2014, 9, 859
DOI: 10.2217/nnm.14.36

3D bioprinting for cell culture and tissue fabrication

Honglei Jian, Meiyue Wang, Shengtao Wang, Anhe Wang and Shuo Bai

Bio-des. Manuf., 2018, 1, 45
DOI: 10.1007/s42242-018-0006-1

3D Bio-Printing: A Technological Revolution from Cardiology Therapy to Life Regeneration

Rumo Bian

HSET, 2025, 139, 71
DOI: 10.54097/cw76mx72

Alginate/Gelatin Hydrogel Scaffold Containing nCeO2 as a Potential Osteogenic Nanomaterial for Bone Tissue Engineering

Feng Li, Jian Li, Xujun Song, Tong Sun, Lian Mi, Jian Liu, Xiaomin Xia, Na Bai and Xue Li

IJN, 2022, Volume 17, 6561
DOI: 10.2147/IJN.S388942

3D bioprinting and itsin vivoapplications

Nhayoung Hong, Gi‐Hoon Yang, JaeHwan Lee and GeunHyung Kim

J Biomed Mater Res, 2018, 106, 444
DOI: 10.1002/jbm.b.33826

Biofabrication: an overview of the approaches used for printing of living cells

Cameron J. Ferris, Kerry G. Gilmore, Gordon G. Wallace and Marc in het Panhuis

Appl Microbiol Biotechnol, 2013, 97, 4243
DOI: 10.1007/s00253-013-4853-6

Advances in Tissue Engineering and Innovative Fabrication Techniques for 3-D-Structures: Translational Applications in Neurodegenerative Diseases

Federica Rey, Bianca Barzaghini, Alessandra Nardini, Matteo Bordoni, Gian Vincenzo Zuccotti, Cristina Cereda, Manuela Teresa Raimondi and Stephana Carelli

Cells, 2020, 9, 1636
DOI: 10.3390/cells9071636

Modeling the pre-metastatic niche of gastric cancer peritoneal metastasis under spatiotemporal resolution and investigating EVs-mediated immune suppression

Xiang Zhang, Cheng Zhang, Zheng Zhang, Xuan Zhang and Kai Wang

Front. Immunol., 2026, 16
DOI: 10.3389/fimmu.2025.1734244

The characterization of particle number and distribution inside in-flight 3D printed droplets using a high speed droplet imaging system

Xinxing Chen, Aidan P. O’Mahony and Tracie Barber

Journal of Applied Physics, 2021, 130
DOI: 10.1063/5.0058817

Current Trends on Medical and Pharmaceutical Applications of Inkjet Printing Technology

Nicolaos Scoutaris, Steven Ross and Dennis Douroumis

Pharm Res, 2016, 33, 1799
DOI: 10.1007/s11095-016-1931-3

Targeted Printing of Cells: Evaluation of ADA-PEG Bioinks for Drop on Demand Approaches

Emine Karakaya, Faina Bider, Andreas Frank, Jörg Teßmar, Lisa Schöbel, Leonard Forster, Stefan Schrüfer, Hans-Werner Schmidt, Dirk Wolfram Schubert, Andreas Blaeser, Aldo R. Boccaccini and Rainer Detsch

Gels, 2022, 8, 206
DOI: 10.3390/gels8040206

Development of Plum Seed-Derived Carboxymethylcellulose Bioink for 3D Bioprinting

Juo Lee, Sungmin Lee, Jae Woon Lim, Iksong Byun, Kyoung-Je Jang, Jin-Woo Kim, Jong Hoon Chung, Jungsil Kim and Hoon Seonwoo

Polymers, 2023, 15, 4473
DOI: 10.3390/polym15234473

Pneumatic conveying inkjet bioprinting for the processing of living cells

Justyna Bożek, Olga Kurchakova, Johanna Michel, Isabel Groß, Lena Gerhards, Yanzhen Zhang, Izabella Brand and Anja U Bräuer

Biofabrication, 2025, 17, 025003
DOI: 10.1088/1758-5090/ada8e2

Progress in skeletal muscle tissue engineering: advancing from 3D to 4D bioprinting

Diya Pillai Babu, Radhakrishnan Sreena, Kristen Brenner, Arputharaj Joseph Nathanael and Vipuil Kishore

Prog. Biomed. Eng., 2026, 8, 012003
DOI: 10.1088/2516-1091/ae1e47

Decellularized extracellular matrix: a step towards the next generation source for bioink manufacturing

Byoung Soo Kim, Hyeonji Kim, Ge Gao, Jinah Jang and Dong-Woo Cho

Biofabrication, 2017, 9, 034104
DOI: 10.1088/1758-5090/aa7e98

Tissue/Organ-Derived Bioink Formulation for 3D Bioprinting

Shibu Chameettachal, Shyama Sasikumar, Soumya Sethi, Yeleswarapu Sriya and Falguni Pati

J. 3D Print. Med., 2019, 3, 39
DOI: 10.2217/3dp-2018-0024

Direct Lipid Profiling of Single Cells from Inkjet Printed Microarrays

Shane R. Ellis, Cameron J. Ferris, Kerry J. Gilmore, Todd W. Mitchell, Stephen J. Blanksby and Marc in het Panhuis

Anal. Chem., 2012, 84, 9679
DOI: 10.1021/ac302634u

Inkjet Printing of Pharmaceuticals

Paola Carou‐Senra, Lucía Rodríguez‐Pombo, Atheer Awad, Abdul W. Basit, Carmen Alvarez‐Lorenzo and Alvaro Goyanes

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202309164

3D in vitro Models of Pathological Skeletal Muscle: Which Cells and Scaffolds to Elect?

Eugenia Carraro, Lucia Rossi, Edoardo Maghin, Marcella Canton and Martina Piccoli

Front. Bioeng. Biotechnol., 2022, 10
DOI: 10.3389/fbioe.2022.941623

Virtual Reality as Tool for Bioprinting Quality Inspection: A Proof of Principle

Sarah Gretzinger, Barbara Schmieg, Gisela Guthausen and Jürgen Hubbuch

Front. Bioeng. Biotechnol., 2022, 10
DOI: 10.3389/fbioe.2022.895842

Sacrificial microgel-laden bioink-enabled 3D bioprinting of mesoscale pore networks

Lei Shao, Qing Gao, Chaoqi Xie, Jianzhong Fu, Meixiang Xiang, Zhenjie Liu, Liulin Xiang and Yong He

Bio-des. Manuf., 2020, 3, 30
DOI: 10.1007/s42242-020-00062-y

Tailoring Hydrogel Viscoelasticity with Physical and Chemical Crosslinking

Michal Bartnikowski, R Wellard, Maria Woodruff and Travis Klein

Polymers, 2015, 7, 2650
DOI: 10.3390/polym7121539

Machine Learning in Gel-Based Additive Manufacturing: From Material Design to Process Optimization

Zhizhou Zhang, Yaxin Wang and Weiguang Wang

Gels, 2025, 11, 582
DOI: 10.3390/gels11080582

Cross-Linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects

Ashley M. Compaan, Kaidong Song, Wenxuan Chai and Yong Huang

ACS Appl. Mater. Interfaces, 2020, 12, 7855
DOI: 10.1021/acsami.9b15451

An Overview of Hydrogel-Based Bioinks for 3D Bioprinting of Soft Tissues

Soumitra Das and Bikramjit Basu

J Indian Inst Sci, 2019, 99, 405
DOI: 10.1007/s41745-019-00129-5

3D bioprinting for diagnostic and therapeutic application

Aarti Puri, Nitin Sahai, Tanzeel Ahmed and Kuldeep Saxena

Materials Today: Proceedings, 2023
DOI: 10.1016/j.matpr.2023.08.165

A Review of the Fabrication of Soft Structures with Three-dimensional Printing Technology

Jinah Jang and Dong-Woo Cho

Journal of the Korean Society of Manufacturing Process Engineers, 2015, 14, 142
DOI: 10.14775/ksmpe.2015.14.6.142

Hydrodynamic dispensing and electrical manipulation of attolitre droplets

Yanzhen Zhang, Benliang Zhu, Yonghong Liu and Gunther Wittstock

Nat Commun, 2016, 7
DOI: 10.1038/ncomms12424

Advances in biofabrication techniques towards functional bioprinted heterogeneous engineered tissues: A comprehensive review

William S. Harley, Chi Chung Li, Joseph Toombs, Cathal D. O'Connell, Hayden K. Taylor, Daniel E. Heath and David J. Collins

Bioprinting, 2021, 23, e00147
DOI: 10.1016/j.bprint.2021.e00147

A review on fabricating tissue scaffolds using vat photopolymerization

Nicholas A. Chartrain, Christopher B. Williams and Abby R. Whittington

Acta Biomaterialia, 2018, 74, 90
DOI: 10.1016/j.actbio.2018.05.010

The applicability of furfuryl‐gelatin as a novel bioink for tissue engineering applications

Shweta AnilKumar, Shane C. Allen, Nishat Tasnim, Tahmina Akter, Shinhye Park, Alok Kumar, Munmun Chattopadhyay, Yoshihiro Ito, Laura J. Suggs and Binata Joddar

J Biomed Mater Res, 2019, 107, 314
DOI: 10.1002/jbm.b.34123

Integrating three-dimensional printing and nanotechnology for musculoskeletal regeneration

Margaret Nowicki, Nathan J Castro, Raj Rao, Michael Plesniak and Lijie Grace Zhang

Nanotechnology, 2017, 28, 382001
DOI: 10.1088/1361-6528/aa8351

Multi-Objective Optimization Design through Machine Learning for Drop-on-Demand Bioprinting

Jia Shi, Jinchun Song, Bin Song and Wen F. Lu

Engineering, 2019, 5, 586
DOI: 10.1016/j.eng.2018.12.009

Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing

Barbara Lorber, Wen-Kai Hsiao, Ian M Hutchings and Keith R Martin

Biofabrication, 2013, 6, 015001
DOI: 10.1088/1758-5082/6/1/015001

Adaptable Hydrogel Networks with Reversible Linkages for Tissue Engineering

Huiyuan Wang and Sarah C. Heilshorn

Advanced Materials, 2015, 27, 3717
DOI: 10.1002/adma.201501558

A Psychrophilic GelMA: Breaking Technical and Immunological Barriers for Multimaterial High-Resolution 3D Bioprinting

Alessandro Zaupa, Claudia Terraza, Phammela N. Abarzúa-Illanes, Nicholas Byres, Gabriela Zavala, Jimena Cuenca, Carmen Hidalgo, Sergio M. Viafara-Garcia, Bettina Wolf, Karina Pino-Lagos, Jonny J. Blaker, Mayan Rumbak, Maroun Khoury, Javier Enrione and Juan Pablo Acevedo

Biomacromolecules, 2023, 24, 150
DOI: 10.1021/acs.biomac.2c01019

Freeform micropatterning of living cells into cell culture medium using direct inkjet printing

Ju An Park, Sejeong Yoon, Jimin Kwon, Hesung Now, Young Kwon Kim, Woo-Jong Kim, Joo-Yeon Yoo and Sungjune Jung

Sci Rep, 2017, 7
DOI: 10.1038/s41598-017-14726-w

Enhanced Mass Transfer and Improved Catalyst Recovery in a Stirred Reactor by Polymeric Ionic Liquids Modified 3D Printed Devices

Juanjuan Wu, Ying Yan, Lijing Zhang, Zizhen Qin and Shengyang Tao

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201800515

Bioink: a 3D-bioprinting tool for anticancer drug discovery and cancer management

Arpita P. Tiwari, Nanasaheb D. Thorat, Sabrina Pricl, Rakesh M. Patil, Sonali Rohiwal and Helen Townley

Drug Discovery Today, 2021, 26, 1574
DOI: 10.1016/j.drudis.2021.03.010

Extracellular Matrix-Derived Hydrogels as Biomaterial for Different Skeletal Muscle Tissue Replacements

Daniele Boso, Edoardo Maghin, Eugenia Carraro, Mattia Giagante, Piero Pavan and Martina Piccoli

Materials, 2020, 13, 2483
DOI: 10.3390/ma13112483

Preparation and Use of Decellularized Extracellular Matrix for Tissue Engineering

Adam D. McInnes, Michael A. J. Moser and Xiongbiao Chen

JFB, 2022, 13, 240
DOI: 10.3390/jfb13040240

3D Bioprinting of Cartilage for Orthopedic Surgeons: Reading between the Lines

Claudia Di Bella, Amanda Fosang, Davide M. Donati, Gordon G. Wallace and Peter F. M. Choong

Front. Surg., 2015, 2
DOI: 10.3389/fsurg.2015.00039

Emulating Human Tissues and Organs: A Bioprinting Perspective Toward Personalized Medicine

Ana Clotilde Fonseca, Ferry P. W. Melchels, Miguel J. S. Ferreira, Samuel R. Moxon, Geoffrey Potjewyd, Tim R. Dargaville, Susan J. Kimber and Marco Domingos

Chem. Rev., 2020, 120, 11093
DOI: 10.1021/acs.chemrev.0c00342

Current progress in 3D printing for cardiovascular tissue engineering

Bobak Mosadegh, Guanglei Xiong, Simon Dunham and James K Min

Biomed. Mater., 2015, 10, 034002
DOI: 10.1088/1748-6041/10/3/034002

Biobridge: An Outlook on Translational Bioinks for 3D Bioprinting

Yawei Gu, Aurelien Forget and V. Prasad Shastri

Advanced Science, 2022, 9
DOI: 10.1002/advs.202103469

3D printing of layered brain-like structures using peptide modified gellan gum substrates

Rodrigo Lozano, Leo Stevens, Brianna C. Thompson, Kerry J. Gilmore, Robert Gorkin, Elise M. Stewart, Marc in het Panhuis, Mario Romero-Ortega and Gordon G. Wallace

Biomaterials, 2015, 67, 264
DOI: 10.1016/j.biomaterials.2015.07.022

Strategies and Molecular Design Criteria for 3D Printable Hydrogels

Tomasz Jungst, Willi Smolan, Kristin Schacht, Thomas Scheibel and Jürgen Groll

Chem. Rev., 2016, 116, 1496
DOI: 10.1021/acs.chemrev.5b00303

Supercritical Fluid‐Based Decellularization Technologies for Regenerative Medicine Applications

Beom‐Seok Kim, Jeong‐Uk Kim, Kyoung‐Ha So and Nathaniel S. Hwang

Macromolecular Bioscience, 2021, 21
DOI: 10.1002/mabi.202100160

Handheld Co-Axial Bioprinting: Application to in situ surgical cartilage repair

Serena Duchi, Carmine Onofrillo, Cathal D. O’Connell, Romane Blanchard, Cheryl Augustine, Anita F. Quigley, Robert M. I. Kapsa, Peter Pivonka, Gordon Wallace, Claudia Di Bella and Peter F. M. Choong

Sci Rep, 2017, 7
DOI: 10.1038/s41598-017-05699-x

Additive Manufacturing of Biomaterials—Design Principles and Their Implementation

Mohammad J. Mirzaali, Vahid Moosabeiki, Seyed Mohammad Rajaai, Jie Zhou and Amir A. Zadpoor

Materials, 2022, 15, 5457
DOI: 10.3390/ma15155457

Evaluation of Gellan Gum Film Containing Virgin Coconut Oil for Transparent Dressing Materials

Nur Arifah Ismail, Siti Fatimah Mohamad, Maizatul Akma Ibrahim and Khairul Anuar Mat Amin

Advances in Biomaterials, 2014, 2014, 1
DOI: 10.1155/2014/351248

Research on the printability of hydrogels in 3D bioprinting

Yong He, FeiFei Yang, HaiMing Zhao, Qing Gao, Bing Xia and JianZhong Fu

Sci Rep, 2016, 6
DOI: 10.1038/srep29977

Why bioprinting in regenerative medicine should adopt a rational technology readiness assessment

Cathal D. O’Connell, Paul D. Dalton and Dietmar W. Hutmacher

Trends in Biotechnology, 2024, 42, 1218
DOI: 10.1016/j.tibtech.2024.03.006

3D Bioprinting Stem Cell Derived Tissues

Nishat Tasnim, Laura De la Vega, Shweta Anil Kumar, Laila Abelseth, Matthew Alonzo, Meitham Amereh, Binata Joddar and Stephanie M. Willerth

Cel. Mol. Bioeng., 2018, 11, 219
DOI: 10.1007/s12195-018-0530-2

A comprehensive review on droplet-based bioprinting: Past, present and future

Hemanth Gudapati, Madhuri Dey and Ibrahim Ozbolat

Biomaterials, 2016, 102, 20
DOI: 10.1016/j.biomaterials.2016.06.012

Recapitulating the bone extracellular matrix through 3D bioprinting using various crosslinking chemistries

Laurens Parmentier, Edward Vermeersch and Sandra Van Vlierberghe

Front. Bioeng. Biotechnol., 2025, 13
DOI: 10.3389/fbioe.2025.1506122

Three-dimensional printing of cell-laden bioink for blood vessel tissue engineering: influence of process parameters and components on cell viability

Chongshuai Chen, Congcong Zhan, Xia Huang, Shanfeng Zhang and Junying Chen

Journal of Biomaterials Science, Polymer Edition, 2023, 34, 2411
DOI: 10.1080/09205063.2023.2251781

Three-Dimensional Microfibrous Bundle Structure Fabricated Using an Electric Field-Assisted/Cell Printing Process for Muscle Tissue Regeneration

Miji Yeo and GeunHyung Kim

ACS Biomater. Sci. Eng., 2018, 4, 728
DOI: 10.1021/acsbiomaterials.7b00983

Manufacturing of animal products by the assembly of microfabricated tissues

Jinah Jang, Byeongwook Jo, Minghao Nie and Shoji Takeuchi

Essays in Biochemistry, 2021, 65, 611
DOI: 10.1042/EBC20200092

Revolutionizing Intervertebral Disc Regeneration: Advances and Future Directions in Three-Dimensional Bioprinting of Hydrogel Scaffolds

Xiaobo Zhang, Xidan Gao, Xuefang Zhang, Xin Yao and Xin Kang

IJN, 2024, Volume 19, 10661
DOI: 10.2147/IJN.S469302

Polyvinylpyrrolidone-Based Bio-Ink Improves Cell Viability and Homogeneity during Drop-On-Demand Printing

Wei Ng, Wai Yeong and May Naing

Materials, 2017, 10, 190
DOI: 10.3390/ma10020190

Printing bone in a gel: using nanocomposite bioink to print functionalised bone scaffolds

G. Cidonio, M. Cooke, M. Glinka, J.I. Dawson, L. Grover and R.O.C. Oreffo

Materials Today Bio, 2019, 4, 100028
DOI: 10.1016/j.mtbio.2019.100028

Versatile Cell-Specific Ligand Arrangement System onto Desired Compartments of Biodegradable Matrices for Site-Selective Cell Adhesion Using DNA Tags

Hiromichi Sumida, Yuta Yoshizaki, Akinori Kuzuya and Yuichi Ohya

Biomacromolecules, 2020, 21, 3713
DOI: 10.1021/acs.biomac.0c00814

Swelling Behaviour and Water Vapour Transmission Rates of Gellan Gum/Collagen Film Containing Gatifloxacin as Dressing Materials

Aznatul Jannah Abu Bakar and Khairul Anuar Mat Amin

MSF, 2021, 1041, 75
DOI: 10.4028/www.scientific.net/MSF.1041.75

Development of lumen-based perfusable 3D liver in vitro model using single-step bioprinting with composite bioinks

Somnath Maji, Minkyoung Lee, Jooyoung Lee, Jaehee Lee and Hyungseok Lee

Materials Today Bio, 2023, 21, 100723
DOI: 10.1016/j.mtbio.2023.100723

Dual‐Stage Crosslinking of a Gel‐Phase Bioink Improves Cell Viability and Homogeneity for 3D Bioprinting

Karen Dubbin, Yuki Hori, Kazuomori K. Lewis and Sarah C. Heilshorn

Adv Healthcare Materials, 2016, 5, 2488
DOI: 10.1002/adhm.201600636

Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting

Michael Di Giuseppe, Nicholas Law, Braeden Webb, Ryley A. Macrae, Lawrence J. Liew, Timothy B. Sercombe, Rodney J. Dilley and Barry J. Doyle

Journal of the Mechanical Behavior of Biomedical Materials, 2018, 79, 150
DOI: 10.1016/j.jmbbm.2017.12.018

Integration of 3D printing with dosage forms: A new perspective for modern healthcare

Shende Pravin and Agrawal Sudhir

Biomedicine & Pharmacotherapy, 2018, 107, 146
DOI: 10.1016/j.biopha.2018.07.167

A review on 3D printing in tissue engineering applications

Mohan Prasath Mani, Madeeha Sadia, Saravana Kumar Jaganathan, Ahmad Zahran Khudzari, Eko Supriyanto, Syafiqah Saidin, Seeram Ramakrishna, Ahmad Fauzi Ismail and Ahmad Athif Mohd Faudzi

Journal of Polymer Engineering, 2022, 42, 243
DOI: 10.1515/polyeng-2021-0059

3D Bioprinting in Skeletal Muscle Tissue Engineering

Serge Ostrovidov, Sahar Salehi, Marco Costantini, Kasinan Suthiwanich, Majid Ebrahimi, Ramin Banan Sadeghian, Toshinori Fujie, Xuetao Shi, Stefano Cannata, Cesare Gargioli, Ali Tamayol, Mehmet Remzi Dokmeci, Gorka Orive, Wojciech Swieszkowski and Ali Khademhosseini

Small, 2019, 15
DOI: 10.1002/smll.201805530

Patient‐Specific Bioinks for 3D Bioprinting of Tissue Engineering Scaffolds

Negar Faramarzi, Iman K. Yazdi, Mahboubeh Nabavinia, Andrea Gemma, Adele Fanelli, Andrea Caizzone, Leon M. Ptaszek, Indranil Sinha, Ali Khademhosseini, Jeremy N. Ruskin and Ali Tamayol

Adv Healthcare Materials, 2018, 7
DOI: 10.1002/adhm.201701347

Effectiveness of collagen and gatifloxacin in improving the healing and antibacterial activities of gellan gum hydrogel films as dressing materials

Aznatul Jannah Abu Bakar, Nurul Shahirah Mohd Azam, Vigneswari Sevakumaran, Wan Iryani Wan Ismail, Mohd Hasmizam Razali, Saiful Izwan Abdul Razak and Khairul Anuar Mat Amin

International Journal of Biological Macromolecules, 2023, 245, 125494
DOI: 10.1016/j.ijbiomac.2023.125494

Bioprinting and biomaterials for dental alveolar tissue regeneration

Serge Ostrovidov, Murugan Ramalingam, Hojae Bae, Gorka Orive, Toshinori Fujie, Xuetao Shi and Hirokazu Kaji

Front. Bioeng. Biotechnol., 2023, 11
DOI: 10.3389/fbioe.2023.991821

Three-dimensional printing of the retina

Barbara Lorber, Wen-Kai Hsiao and Keith R. Martin

Current Opinion in Ophthalmology, 2016, 27, 262
DOI: 10.1097/ICU.0000000000000252

Designing Biomaterials for 3D Printing

Murat Guvendiren, Joseph Molde, Rosane M.D. Soares and Joachim Kohn

ACS Biomater. Sci. Eng., 2016, 2, 1679
DOI: 10.1021/acsbiomaterials.6b00121

A microvalve cell printing technique using riboflavin photosensitizer for selective cell patterning onto a retinal chip

Yu Wei Lin, Kun Lin Tsou, Cormac D. Fay, Xiao Liu, Johnson H.Y. Chung, Dipixa Sharma, Ali Jeiranikhameneh, Po Han Kuo, Chi Kuan Tzeng, Gordon G. Wallace, Chung Yu Wu, Ming Dou Ker, Jui I. Chao and Yu Ting Cheng

Bioprinting, 2020, 20, e00097
DOI: 10.1016/j.bprint.2020.e00097

Inkjet printed (bio)chemical sensing devices

Nobutoshi Komuro, Shunsuke Takaki, Koji Suzuki and Daniel Citterio

Anal Bioanal Chem, 2013, 405, 5785
DOI: 10.1007/s00216-013-7013-z

Freeform 3D printing of soft matters: recent advances in technology for biomedical engineering

Shengyang Chen, Wen See Tan, Muhammad Aidil Bin Juhari, Qian Shi, Xue Shirley Cheng, Wai Lee Chan and Juha Song

Biomed. Eng. Lett., 2020, 10, 453
DOI: 10.1007/s13534-020-00171-8

Computational Fluid Dynamics Analysis and Empirical Evaluation of Carboxymethylcellulose/Alginate 3D Bioprinting Inks for Screw-Based Microextrusion

Sungmin Lee, Minjae Son, Juo Lee, Iksong Byun, Jin-Woo Kim, Jungsil Kim and Hoon Seonwoo

Polymers, 2024, 16, 1137
DOI: 10.3390/polym16081137

Biomedical applications of three‐dimensional bioprinted craniofacial tissue engineering

Nitin Bharat Charbe, Murtaza Tambuwala, Sushesh Srivatsa Palakurthi, Amol Warokar, Altijana Hromić‐Jahjefendić, Hamid Bakshi, Flavia Zacconi, Vijay Mishra, Saurabh Khadse, Alaa A. Aljabali, Mohamed El‐Tanani, Ãngel Serrano‐Aroca and Srinath Palakurthi

Bioengineering & Transla Med, 2023, 8
DOI: 10.1002/btm2.10333

Electroactive Tissue Scaffolds with Aligned Pores as Instructive Platforms for Biomimetic Tissue Engineering

John Hardy, R. Cornelison, Rushi Sukhavasi, Richard Saballos, Philip Vu, David Kaplan and Christine Schmidt

Bioengineering, 2015, 2, 15
DOI: 10.3390/bioengineering2010015

Printed Dual Cell Arrays for Multiplexed Sensing

Irina Drachuk, Rattanon Suntivich, Rossella Calabrese, Svetlana Harbaugh, Nancy Kelley-Loughnane, David L. Kaplan, Morley Stone and Vladimir V. Tsukruk

ACS Biomater. Sci. Eng., 2015, 1, 287
DOI: 10.1021/ab500085k

A Systematic Review on Effect of Bifidobacterium Isolated from Skin Microbiota on GLP-1 Production to Alleviate Human Ailments

Shristy Verma, Arun Kumar Mishra, Amrita Mishra, Kamal Y. Thajudeen, Harpreet Singh and Gyas Khan

Probiotics & Antimicro. Prot., 2026, 18, 3151
DOI: 10.1007/s12602-025-10709-w

Single-Cell Printer: Automated, On Demand, and Label Free

Andre Gross, Jonas Schöndube, Sonja Niekrawitz, Wolfgang Streule, Lutz Riegger, Roland Zengerle and Peter Koltay

SLAS Technology, 2013, 18, 504
DOI: 10.1177/2211068213497204

Drug delivery systems and materials for wound healing applications

Saghi Saghazadeh, Chiara Rinoldi, Maik Schot, Sara Saheb Kashaf, Fatemeh Sharifi, Elmira Jalilian, Kristo Nuutila, Giorgio Giatsidis, Pooria Mostafalu, Hossein Derakhshandeh, Kan Yue, Wojciech Swieszkowski, Adnan Memic, Ali Tamayol and Ali Khademhosseini

Advanced Drug Delivery Reviews, 2018, 127, 138
DOI: 10.1016/j.addr.2018.04.008

3D Bioprinting for Organ Regeneration

Haitao Cui, Margaret Nowicki, John P. Fisher and Lijie Grace Zhang

Adv Healthcare Materials, 2017, 6
DOI: 10.1002/adhm.201601118

An overview: non-toxic and eco-friendly polysaccharides—its classification, properties, and diverse applications

Swati Sharma and Manisha Bhende

Polym. Bull., 2024, 81, 12383
DOI: 10.1007/s00289-024-05307-9

Development of Liver Decellularized Extracellular Matrix Bioink for Three-Dimensional Cell Printing-Based Liver Tissue Engineering

Hyungseok Lee, Wonil Han, Hyeonji Kim, Dong-Heon Ha, Jinah Jang, Byoung Soo Kim and Dong-Woo Cho

Biomacromolecules, 2017, 18, 1229
DOI: 10.1021/acs.biomac.6b01908

Commercially available microgels for 3D bioprinting

Christopher S. O’Bryan, Tapomoy Bhattacharjee, Samantha L. Marshall, W. Gregory Sawyer and Thomas E. Angelini

Bioprinting, 2018, 11, e00037
DOI: 10.1016/j.bprint.2018.e00037

Cell compatible encapsulation of filaments into 3D hydrogels

Katharina S U Schirmer, Robert Gorkin, Stephen Beirne, Elise Stewart, Brianna C Thompson, Anita F Quigley, Robert M I Kapsa and Gordon G Wallace

Biofabrication, 2016, 8, 025013
DOI: 10.1088/1758-5090/8/2/025013

Tissue and Organ 3D Bioprinting

Zengmin Xia, Sha Jin and Kaiming Ye

SLAS Technology, 2018, 23, 301
DOI: 10.1177/2472630318760515

An Experimental Study on the Mechanical and Biological Properties of Bio-Printed Alginate/Halloysite Nanotube/Methylcellulose/Russian Olive-Based Scaffolds

Babak Roshangar Zineh, Mohammad Reza Shabgard and Leila Roshangar

Adv Pharm Bull, 2018, 8, 643
DOI: 10.15171/apb.2018.073

Direct Ink Writing of Poly(tetrafluoroethylene) (PTFE) with Tunable Mechanical Properties

Zhuoran Jiang, Ozan Erol, Devina Chatterjee, Weinan Xu, Narutoshi Hibino, Lewis H. Romer, Sung Hoon Kang and David H. Gracias

ACS Appl. Mater. Interfaces, 2019, 11, 28289
DOI: 10.1021/acsami.9b07279

Cells on chip for multiplex screening

Ophélie I. Berthuy, Loïc J. Blum and Christophe A. Marquette

Biosensors and Bioelectronics, 2016, 76, 29
DOI: 10.1016/j.bios.2015.04.024

Insertion of Vertically Aligned Nanowires into Living Cells by Inkjet Printing of Cells

Donggyu Lee, Daehee Lee, Yulim Won, Hyeonaug Hong, Yongjae Kim, Hyunwoo Song, Jae‐Chul Pyun, Yong Soo Cho, Wonhyoung Ryu and Jooho Moon

Small, 2016, 12, 1446
DOI: 10.1002/smll.201502510

Dual Crosslinked Antioxidant Mixture of Poly(vinyl alcohol) and Cerium Oxide Nanoparticles as a Bioink for 3D Bioprinting

Nasera Rizwana, Namrata Maslekar, Kaushik Chatterjee, Yin Yao, Vipul Agarwal and Manasa Nune

ACS Appl. Nano Mater., 2024, 7, 18177
DOI: 10.1021/acsanm.3c02962

Driving Deployment of Bioengineered Products—An Arduous, Sometimes Tedious, Challenging, Rewarding, Most Exciting Journey That Has to Be Made!

Gordon George Wallace

Bioengineering, 2024, 11, 856
DOI: 10.3390/bioengineering11080856

The assessment of average cell number inside in-flight 3D printed droplets in microvalve-based bioprinting

Xinxing Chen, Aidan P. O’Mahony and Tracie Barber

Journal of Applied Physics, 2022, 131
DOI: 10.1063/5.0096468

Regenerative strategies for kidney engineering

Nuria Montserrat, Elena Garreta and Juan Carlos Izpisua Belmonte

The FEBS Journal, 2016, 283, 3303
DOI: 10.1111/febs.13704

Evaluation of bioprinter technologies

Ibrahim T. Ozbolat, Kazim K. Moncal and Hemanth Gudapati

Additive Manufacturing, 2017, 13, 179
DOI: 10.1016/j.addma.2016.10.003

Biomaterials for articular cartilage tissue engineering: Learning from biology

A.R. Armiento, M.J. Stoddart, M. Alini and D. Eglin

Acta Biomaterialia, 2018, 65, 1
DOI: 10.1016/j.actbio.2017.11.021

Converging 2D Nanomaterials and 3D Bioprinting Technology: State‐of‐the‐Art, Challenges, and Potential Outlook in Biomedical Applications

Hadi Rastin, Negar Mansouri, Tran Thanh Tung, Kamrul Hassan, Arash Mazinani, Mahnaz Ramezanpour, Pei Lay Yap, Le Yu, Sarah Vreugde and Dusan Losic

Adv Healthcare Materials, 2021, 10
DOI: 10.1002/adhm.202101439

emprego da impressão tridimensional no planejamento cirúrgico

Ana Paula Aparecida dos Santos Varela, Deivid Ramos dos Santos, Iasmin Maia Soares de Araújo, Daniela Ferreira Tramontin, Ana Carolina Cunha Costa and Charles Alberto Villacorta de Barros

PRMJ, 2020, 4, 1
DOI: 10.4322/prmj.2019.034

Investigation of the hydrodynamic response of cells in drop on demand piezoelectric inkjet nozzles

Eric Cheng, Haoran Yu, Ali Ahmadi and Karen C Cheung

Biofabrication, 2016, 8, 015008
DOI: 10.1088/1758-5090/8/1/015008

Bioprinting Neural Systems to Model Central Nervous System Diseases

Boning Qiu, Nils Bessler, Kianti Figler, Maj‐Britt Buchholz, Anne C. Rios, Jos Malda, Riccardo Levato and Massimiliano Caiazzo

Adv Funct Materials, 2020, 30
DOI: 10.1002/adfm.201910250

Inkjet-based bioprinting for tissue engineering

Ju An Park, Yunji Lee and Sungjune Jung

Organoid, 2023, 3, e12
DOI: 10.51335/organoid.2023.3.e12

Microporous 3D bioprinting: a novel technology for biofabrication

Hongxiang Cai, Yongrui Cai, Zichuan Ding, Jiaxuan Fan, Yahao Lai, Chao Huang, Boyi Jiang, Can Zhou, Zongke Zhou, Xingcai Zhang and Zeyu Luo

Bio-des. Manuf., 2025, 8, 847
DOI: 10.1631/bdm.2400490

Bioinks and Bioprinting Strategies for Skeletal Muscle Tissue Engineering

Mohamadmahdi Samandari, Jacob Quint, Alejandra Rodríguez‐delaRosa, Indranil Sinha, Olivier Pourquié and Ali Tamayol

Advanced Materials, 2022, 34
DOI: 10.1002/adma.202105883

Rheology in Product Development: An Insight into 3D Printing of Hydrogels and Aerogels

Raquel V. Barrulas and Marta C. Corvo

Gels, 2023, 9, 986
DOI: 10.3390/gels9120986

Development of 3D bioprinting: From printing methods to biomedical applications

Zeming Gu, Jianzhong Fu, Hui Lin and Yong He

Asian Journal of Pharmaceutical Sciences, 2020, 15, 529
DOI: 10.1016/j.ajps.2019.11.003

Characterization and printability of Sodium alginate -Gelatin hydrogel for bioprinting NSCLC co-culture

Arindam Mondal, Aragaw Gebeyehu, Mariza Miranda, Divya Bahadur, Nilkumar Patel, Subhramanian Ramakrishnan, Arun K. Rishi and Mandip Singh

Sci Rep, 2019, 9
DOI: 10.1038/s41598-019-55034-9

Current research in development of polycaprolactone filament for 3D bioprinting: a review

C Amni, Marwan, S Aprilia and E Indarti

IOP Conf. Ser.: Earth Environ. Sci., 2021, 926, 012080
DOI: 10.1088/1755-1315/926/1/012080

Recent advances in the development of bioartificial pancreas using 3D bioprinting for the treatment of type 1 diabetes: a review

Anushikha Ghosh, Arka Sanyal and Abhik Mallick

Exploration of Medicine, 2023, 886
DOI: 10.37349/emed.2023.00184

Multifaceted polymeric materials in three‐dimensional processing (3DP) technologies: Current progress and prospects

Olayinka Oderinde, Shunli Liu, Kewen Li, Mengmeng Kang, Hussain Imtiaz, Fang Yao and Guodong Fu

Polymers for Advanced Techs, 2018, 29, 1586
DOI: 10.1002/pat.4281

Three-dimensional printing of biological matters

Ahmed Munaz, Raja K. Vadivelu, James St. John, Matthew Barton, Harshad Kamble and Nam-Trung Nguyen

Journal of Science: Advanced Materials and Devices, 2016, 1, 1
DOI: 10.1016/j.jsamd.2016.04.001

Gelatin–Sodium Alginate Hydrogels Cross-Linked by Squaric Acid and Dialdehyde Starch as a Potential Bio-Ink

Joanna Skopinska-Wisniewska, Marta Tuszynska, Łukasz Kaźmierski, Mateusz Bartniak and Anna Bajek

Polymers, 2024, 16, 2560
DOI: 10.3390/polym16182560

From Microscale Devices to 3D Printing

Anton V. Borovjagin, Brenda M. Ogle, Joel L. Berry and Jianyi Zhang

Circulation Research, 2017, 120, 150
DOI: 10.1161/CIRCRESAHA.116.308538

Investigation of cell viability and morphology in 3D bio‐printed alginate constructs with tunable stiffness

Pujiang Shi, Augustinus Laude and Wai Yee Yeong

J Biomedical Materials Res, 2017, 105, 1009
DOI: 10.1002/jbm.a.35971

A gellan-based fluid gel carrier to enhance topical spray delivery

B. ter Horst, R.J.A. Moakes, G. Chouhan, R.L. Williams, N.S. Moiemen and L.M. Grover

Acta Biomaterialia, 2019, 89, 166
DOI: 10.1016/j.actbio.2019.03.036

Recent Advances in Nerve Tissue Engineering

Bill G.X. Zhang, Anita F. Quigley, Damian E. Myers, Gordon G. Wallace, Robert M.I. Kapsa and Peter F.M. Choong

Int J Artif Organs, 2014, 37, 277
DOI: 10.5301/ijao.5000317

Inkjet printing for pharmaceutics – A review of research and manufacturing

Ronan Daly, Tomás S. Harrington, Graham D. Martin and Ian M. Hutchings

International Journal of Pharmaceutics, 2015, 494, 554
DOI: 10.1016/j.ijpharm.2015.03.017

Developments with 3D bioprinting for novel drug discovery

Aishwarya Satpathy, Pallab Datta, Yang Wu, Bugra Ayan, Ertugrul Bayram and Ibrahim T. Ozbolat

Expert Opinion on Drug Discovery, 2018, 13, 1115
DOI: 10.1080/17460441.2018.1542427

Degradation regulated bioactive hydrogel as the bioink with desirable moldability for microfluidic biofabrication

Xiaolu Liu, Yicong Zuo, Jing Sun, Zhenzhen Guo, Hongsong Fan and Xingdong Zhang

Carbohydrate Polymers, 2017, 178, 8
DOI: 10.1016/j.carbpol.2017.09.014

Simultaneous Separating, Splitting, Collecting, and Dispensing by Droplet Pinch‐Off for Droplet Cell Culture

Seo Jun Bae, Seon Jun Lee and Do Jin Im

Small, 2024, 20
DOI: 10.1002/smll.202309062

Living Cell Microarrays: An Overview of Concepts

Rebecca Jonczyk, Tracy Kurth, Antonina Lavrentieva, Johanna-Gabriela Walter, Thomas Scheper and Frank Stahl

Microarrays, 2016, 5, 11
DOI: 10.3390/microarrays5020011

Engineering of Tough Double Network Hydrogels

Qiang Chen, Hong Chen, Lin Zhu and Jie Zheng

Macro Chemistry & Physics, 2016, 217, 1022
DOI: 10.1002/macp.201600038