Fabrication of highly pressure-sensitive, hydrophobic, and flexible 3D carbon nanofiber networks by electrospinning for human physiological signal monitoring

Zhiyuan Han, Zhiqiang Cheng, Ying Chen, Bo Li, Ziwei Liang, Hangfei Li, Yinji Ma and Xue Feng

Nanoscale, 2019, 11, 5942
DOI: 10.1039/C8NR08341J

Hierarchically structured bioactive foams based on polyvinyl alcohol–sepiolite nanocomposites

Bernd Wicklein, Pilar Aranda, Eduardo Ruiz-Hitzky and Margarita Darder

J. Mater. Chem. B, 2013, 1, 2911
DOI: 10.1039/c3tb00580a

Lightweight, mechanically flexible and thermally superinsulating rGO/polyimide nanocomposite foam with an anisotropic microstructure

Yuyang Qin, Qingyu Peng, Yue Zhu, Xu Zhao, Zaishan Lin, Xiaodong He and Yibin Li

Nanoscale Adv., 2019, 1, 4895
DOI: 10.1039/C9NA00444K

Morphology of latex and nanocomposite adsorbents prepared by freeze-casting

Lucimara Lopes da Silva and Fernando Galembeck

J. Mater. Chem. A, 2015, 3, 7263
DOI: 10.1039/C4TA05743K

Facile preparation of clay reinforced konjac glucomannan aerogels

Jing Li, Ting Ye, Bin Zhou and Bin Li

RSC Adv., 2014, 4, 22251
DOI: 10.1039/c4ra03165b

Hierarchical assembly of micro-/nano-building blocks: bio-inspired rigid structural functional materials

Hong-Bin Yao, Hai-Yu Fang, Xiao-Han Wang and Shu-Hong Yu

Chem. Soc. Rev., 2011, 40, 3764
DOI: 10.1039/c0cs00121j

A carbon nanotube approach for efficient thermally insulating material with high mechanical stability and fire-retardancy

Hang Zhan, Qiang Qiang Shi, Guang Wu and Jian Nong Wang

RSC Adv., 2020, 10, 21772
DOI: 10.1039/D0RA03472J

Poly(vinyl alcohol)/clay aerogel composites with enhanced flame retardancy

Peng Shen, Hai-Bo Zhao, Wei Huang and Hong-Bing Chen

RSC Adv., 2016, 6, 109809
DOI: 10.1039/C6RA21689G

Clay aerogel/cellulose whisker nanocomposites: a nanoscale wattle and daub

Matthew D. Gawryla, Otto van den Berg, Christoph Weder and David A. Schiraldi

J. Mater. Chem., 2009, 19, 2118
DOI: 10.1039/b823218k

Amphiphilic superabsorbent cellulose nanofibril aerogels

Feng Jiang and You-Lo Hsieh

J. Mater. Chem. A, 2014, 2, 6337
DOI: 10.1039/C4TA00743C

Incorporation of postconsumer polyurethane foam into a polymer/clay aerogel matrix

Rocco P. Viggiano, Edward E. Ball, Ronald E. Park, Karl W. Haider and David A. Schiraldi

J of Applied Polymer Sci, 2015, 132
DOI: 10.1002/app.42586

Biodegradable Pectin/Clay Aerogels

Hong-Bing Chen, Bor-Sen Chiou, Yu-Zhong Wang and David A. Schiraldi

ACS Appl. Mater. Interfaces, 2013, 5, 1715
DOI: 10.1021/am3028603

Low flammability foam-like materials based on epoxy, tannic acid, and sodium montmorillonite clay

Xiaolong Lang, Ke Shang, Yu-Zhong Wang and David A. Schiraldi

Green Materials, 2015, 3, 43
DOI: 10.1680/gmat.14.00019

Improving the mechanical properties of clay/polymer aerogels by a simple dip‐coating procedure

J. R. Johnson and D. A. Schiraldi

J of Applied Polymer Sci, 2012, 126, 2004
DOI: 10.1002/app.36632

Smart release-control of microencapsulated ingredients from milk protein tablets using spray drying and heating

Songwen Tan, Amirali Ebrahimi and Timothy Langrish

Food Hydrocolloids, 2019, 92, 181
DOI: 10.1016/j.foodhyd.2019.02.006

Efficient Approach to Improving the Flame Retardancy of Poly(vinyl alcohol)/Clay Aerogels: Incorporating Piperazine-Modified Ammonium Polyphosphate

Yu-Tao Wang, Shi-Fu Liao, Ke Shang, Ming-Jun Chen, Jian-Qian Huang, Yu-Zhong Wang and David A. Schiraldi

ACS Appl. Mater. Interfaces, 2015, 7, 1780
DOI: 10.1021/am507409d

Effects of Fiber Reinforcement on Clay Aerogel Composites

Katherine Finlay, Matthew Gawryla and David Schiraldi

Materials, 2015, 8, 5440
DOI: 10.3390/ma8085258

Novel Polymer Aerogel toward High Dimensional Stability, Mechanical Property, and Fire Safety

Ke Shang, Jun-Chi Yang, Zhi-Jie Cao, Wang Liao, Yu-Zhong Wang and David A. Schiraldi

ACS Appl. Mater. Interfaces, 2017, 9, 22985
DOI: 10.1021/acsami.7b06096

Multifunctional Polyurethane Composites with Coffee Grounds and Wood Sawdust

Przemysław Bartczak, Julia Stachowiak, Marta Szmitko, Aleksandra Grząbka-Zasadzińska and Sławomir Borysiak

Materials, 2022, 16, 278
DOI: 10.3390/ma16010278

Facile preparation of attapulgite‐based aerogels with excellent flame retardancy and better thermal insulation properties

Weidong Liang, Ran Wang, Chengjun Wang, Juan Jia, Hanxue Sun, Jianli Zhang, Yueyue Yang, Zhaoqi Zhu and An Li

J of Applied Polymer Sci, 2019, 136
DOI: 10.1002/app.47849

Boron/nitrogen flame retardant additives cross‐linked cellulose nanofibril/montmorillonite aerogels toward super‐low flammability and improved mechanical properties

Liang Wang, Miguel Sánchez‐Soto, Jie Fan, Zhao‐Peng Xia and Yong Liu

Polymers for Advanced Techs, 2019, 30, 1807
DOI: 10.1002/pat.4613

Influence of Electrolyte and Polymer Loadings on Mechanical Properties of Clay Aerogels

Saeed M. Alhassan, Syed Qutubuddin and David Schiraldi

Langmuir, 2010, 26, 12198
DOI: 10.1021/la100874r

The effect of synthesis parameters on density and thermal conductivity of MMT based aerogel. Application of experimental design model

A. Skaropoulou, D. Kioupis, S. Tsivilis and G. Kakali

Materials Today: Proceedings, 2022, 58, 1005
DOI: 10.1016/j.matpr.2021.12.492

Reduction of PVA Aerogel Flammability by Incorporation of an Alkaline Catalyst

Zhi-Han Cheng, Mo-Lin Guo, Xiao-Yi Chen, Ting Wang, Yu-Zhong Wang and David A. Schiraldi

Gels, 2021, 7, 57
DOI: 10.3390/gels7020057

Effect of Cross-Linking on Microstructure and Physical Performance of Casein Protein

Arun Ghosh, M. Azam Ali and George J. Dias

Biomacromolecules, 2009, 10, 1681
DOI: 10.1021/bm801341x

Temperature-Responsive Intumescent Chemistry toward Fire Resistance and Super Thermal Insulation under Extremely Harsh Conditions

Ting Wang, Man-Cheng Long, Hai-Bo Zhao, Wen-Li An, Shimei Xu, Cong Deng and Yu-Zhong Wang

Chem. Mater., 2021, 33, 6018
DOI: 10.1021/acs.chemmater.1c01408

Measurement of thermal conductivity of building insulation foams by modulated differential scanning calorimetry — Critical review & observations

J.-F. Masson, S. Bundalo-Perc and P. Mukhopadhyaya

IRASE, 2012, 3, 157
DOI: 10.1556/irase.3.2012.2.9

Polymer/clay aerogel composites with flame retardant agents: Mechanical, thermal and fire behavior

Liang Wang, Miguel Sánchez-Soto and Maria Lluisa Maspoch

Materials & Design (1980-2015), 2013, 52, 609
DOI: 10.1016/j.matdes.2013.05.096

Facile fabrication of poly(vinyl alcohol) gels and derivative aerogels

Hong-Bing Chen, Erin Hollinger, Yu-Zhong Wang and David A. Schiraldi

Polymer, 2014, 55, 380
DOI: 10.1016/j.polymer.2013.07.078

Chitosan/polybenzoxazine/clay mixed matrix composite aerogels: preparation, physical properties, and water absorbency

Almahdi A. Alhwaige, Hatsuo Ishida and Syed Qutubuddin

Applied Clay Science, 2020, 184, 105403
DOI: 10.1016/j.clay.2019.105403

Effects of freezing conditions on the morphology and mechanical properties of clay and polymer/clay aerogels

Yuxin Wang, Matthew D. Gawryla and David A. Schiraldi

J of Applied Polymer Sci, 2013, 129, 1637
DOI: 10.1002/app.39143

Foam-like materials based on whey protein isolate

Hong-Bing Chen, Yu-Zhong Wang and David A. Schiraldi

European Polymer Journal, 2013, 49, 3387
DOI: 10.1016/j.eurpolymj.2013.07.019

Oil absorption performance of polymer/clay aerogel materials

Mohammad I. Al‐Biloushi, Henry Milliman, Matthew D. Gawryla and David A. Schiraldi

J of Applied Polymer Sci, 2018, 135
DOI: 10.1002/app.45844

Foam-like materials produced from milk and sodium montmorillonite clay using a freeze-drying process

Yuxin Wang and David A. Schiraldi

Green Materials, 2013, 1, 11
DOI: 10.1680/gmat.12.00005

Nonflammable Alginate Nanocomposite Aerogels Prepared by a Simple Freeze-Drying and Post-Cross-Linking Method

Ke Shang, Wang Liao, Juan Wang, Yu-Tao Wang, Yu-Zhong Wang and David A. Schiraldi

ACS Appl. Mater. Interfaces, 2016, 8, 643
DOI: 10.1021/acsami.5b09768

Recyclable nanocomposite foams of Poly(vinyl alcohol), clay and cellulose nanofibrils – Mechanical properties and flame retardancy

Lilian Medina, Federico Carosio and Lars A. Berglund

Composites Science and Technology, 2019, 182, 107762
DOI: 10.1016/j.compscitech.2019.107762

Foamlike Xanthan Gum/Clay Aerogel Composites and Tailoring Properties by Blending with Agar

Liang Wang, David A. Schiraldi and Miguel Sánchez-Soto

Ind. Eng. Chem. Res., 2014, 53, 7680
DOI: 10.1021/ie500490n

Foam‐like polymer/clay aerogels which incorporate air bubbles

Rocco P. Viggiano, Matthew D. Gawryla and David A. Schiraldi

J of Applied Polymer Sci, 2014, 131
DOI: 10.1002/app.39546

Water-insoluble aerogels made from cellulose nanocrystals and poly(vinyl alcohol)

Silvana Mueller, Christoph Weder and E. Johan Foster

Green Materials, 2014, 2, 169
DOI: 10.1680/gmat.14.00012

Development of Biodegradable Foamlike Materials Based on Casein and Sodium Montmorillonite Clay

Tassawuth Pojanavaraphan, Rathanawan Magaraphan, Bor-Sen Chiou and David A. Schiraldi

Biomacromolecules, 2010, 11, 2640
DOI: 10.1021/bm100615a

Preparation and Performance of Polyimide-Reinforced Clay Aerogel Composites

Wei Wu, Kai Wang and Mao-Sheng Zhan

Ind. Eng. Chem. Res., 2012, 51, 12821
DOI: 10.1021/ie301622s

Fabrication of novel casein gel with controlled release property via acidification, spray drying and tableting approach

Songwen Tan, Koentadi Hadinoto, Amirali Ebrahimi and Timothy Langrish

Colloids and Surfaces B: Biointerfaces, 2019, 177, 329
DOI: 10.1016/j.colsurfb.2019.02.019

Preparation and Flammability of Poly(vinyl alcohol) Composite Aerogels

Hong-Bing Chen, Yu-Zhong Wang and David A. Schiraldi

ACS Appl. Mater. Interfaces, 2014, 6, 6790
DOI: 10.1021/am500583x

Facile preparation of fracture-free pectin/clay aerogel monoliths

Y. Lu, H. Wu and Q. Chen

Materials Research Innovations, 2015, 19, S2-46
DOI: 10.1179/1432891714Z.0000000001060

Effects of Molecular Weight upon Irradiation-Cross-Linked Poly(vinyl alcohol)/Clay Aerogel Properties

Hong-Bing Chen, Yan Zhao, Peng Shen, Jun-Sheng Wang, Wei Huang and David A. Schiraldi

ACS Appl. Mater. Interfaces, 2015, 7, 20208
DOI: 10.1021/acsami.5b05776

Halloysite-based aerogels by bidirectional freezing with mechanical properties, thermal insulation and flame retardancy

Meng Fu, Wantong Chen, Haojun Deng, Chunhui Chen, Zhikang Fan, Binyu Li and Xiangming Li

Applied Clay Science, 2022, 225, 106547
DOI: 10.1016/j.clay.2022.106547

Mineralization of Clay/Polymer Aerogels: A Bioinspired Approach to Composite Reinforcement

Jack R. Johnson, Jane Spikowski and David A. Schiraldi

ACS Appl. Mater. Interfaces, 2009, 1, 1305
DOI: 10.1021/am9001919

Solution Cross-Linked Natural Rubber (NR)/Clay Aerogel Composites

Tassawuth Pojanavaraphan, Lei Liu, Deniz Ceylan, Oguz Okay, Rathanawan Magaraphan and David A. Schiraldi

Macromolecules, 2011, 44, 923
DOI: 10.1021/ma102443k

Thermal Conductivity and Combustion Properties of Wheat Gluten Foams

Thomas O. J. Blomfeldt, Fritjof Nilsson, Tim Holgate, Jianxiao Xu, Eva Johansson and Mikael S. Hedenqvist

ACS Appl. Mater. Interfaces, 2012, 4, 1629
DOI: 10.1021/am2017877

Directional Freeze‐Casting: A Bioinspired Method to Assemble Multifunctional Aligned Porous Structures for Advanced Applications

Mohammad-Ali Shahbazi, Masoumeh Ghalkhani and Hajar Maleki

Adv Eng Mater, 2020, 22
DOI: 10.1002/adem.202000033

Development of facture free clay-based aerogel: Formulation and architectural mechanisms

Pei Huang and Mizi Fan

Composites Part B: Engineering, 2016, 91, 169
DOI: 10.1016/j.compositesb.2016.01.058

Polyether-block-amide copolymer/clay films prepared via a freeze-drying method

Y. Wang, S.M. Alhassan, V.H. Yang and D.A. Schiraldi

Composites Part B: Engineering, 2013, 45, 625
DOI: 10.1016/j.compositesb.2012.05.017

A material characterization and embodied energy study of novel clay-alginate composite aerogels

Cassandra A. Dove, Fiona F. Bradley and Siddharth V. Patwardhan

Energy and Buildings, 2019, 184, 88
DOI: 10.1016/j.enbuild.2018.10.045

Low flammability, foam-like materials based on ammonium alginate and sodium montmorillonite clay

Hong-Bing Chen, Yu-Zhong Wang, Miguel Sánchez-Soto and David A. Schiraldi

Polymer, 2012, 53, 5825
DOI: 10.1016/j.polymer.2012.10.029

Facile fabrication of mechanically-strong and flame retardant alginate/clay aerogels

Xin-Lei Li, Ming-Jun Chen and Hong-Bing Chen

Composites Part B: Engineering, 2019, 164, 18
DOI: 10.1016/j.compositesb.2018.11.055

Superlight, Mechanically Flexible, Thermally Superinsulating, and Antifrosting Anisotropic Nanocomposite Foam Based on Hierarchical Graphene Oxide Assembly

Qingyu Peng, Yuyang Qin, Xu Zhao, Xianxian Sun, Qiang Chen, Fan Xu, Zaishan Lin, Ye Yuan, Ying Li, Jianjun Li, Weilong Yin, Chao Gao, Fan Zhang, Xiaodong He and Yibin Li

ACS Appl. Mater. Interfaces, 2017, 9, 44010
DOI: 10.1021/acsami.7b14604

Flammability of Polymer/Clay Aerogel Composites: An Overview

Hong-Bing Chen and David A. Schiraldi

Polymer Reviews, 2019, 59, 1
DOI: 10.1080/15583724.2018.1450756

Excellent flame retardant and thermal insulated palygorskite/wood fiber composite aerogels with improved mechanical properties

Xinyu Zhou, Huiran Jin, Tingting Xu, Jinbo Wang, Yong Zhu, Shijie Ding, Tao Hu, Shan Yun and Jing Chen

Applied Clay Science, 2020, 184, 105402
DOI: 10.1016/j.clay.2019.105402

Anisotropic Clay Aerogel Composite Materials

Matthew D Gawryla and David A. Schiraldi

MRS Proc., 2009, 1188
DOI: 10.1557/PROC-1188-LL06-07

Molecular pore size characterization within chitosan biopolymer using positron annihilation lifetime spectroscopy

D. Chaudhary, M.R. Went, K. Nakagawa, S.J. Buckman and J.P Sullivan

Materials Letters, 2010, 64, 2635
DOI: 10.1016/j.matlet.2010.08.045

Biobased Poly(furfuryl alcohol)/Clay Aerogel Composite Prepared by a Freeze-Drying Process

Tianwei Wang, Hua Sun, Jiawei Long, Yu-Zhong Wang and David Schiraldi

ACS Sustainable Chem. Eng., 2016, 4, 2601
DOI: 10.1021/acssuschemeng.6b00089

pH Tailoring Electrical and Mechanical Behavior of Polymer–Clay–Nanotube Aerogels

Matthew D. Gawryla, Lei Liu, Jaime C. Grunlan and David A. Schiraldi

Macromol. Rapid Commun., 2009, 30, 1669
DOI: 10.1002/marc.200900229

Novel Absorbent Materials Created via Ice Templating

Matthew D. Gawryla and David A. Schiraldi

Macro Materials & Eng, 2009, 294, 570
DOI: 10.1002/mame.200900094

Engineering binary-network structured montmorillonite/silica composite aerogels with improved mechanical strength as water-resistant thermal insulators

Xiaowu Wang, Zhi Li, Min Hu, Qiong Liu, Ming Li, Xudong Cheng and Xiaoxu Wu

Applied Clay Science, 2024, 251, 107316
DOI: 10.1016/j.clay.2024.107316

Aramid Pulp Reinforced Clay Aerogel Composites: Mechanical, Thermal and Combustion Behavior

Xiaowu Wang, Yang Wang, Mengtian Sun, Guichao Wang, Qiong Liu, Ming Li, Yury M. Shulga and Zhi Li

Gels, 2022, 8, 654
DOI: 10.3390/gels8100654

Microwave‐crosslinked bio‐based starch/clay aerogels

Liang Wang, Miguel Sánchez‐Soto, Tobias Abt, Maria Lluisa Maspoch and Orlando O Santana

Polymer International, 2016, 65, 899
DOI: 10.1002/pi.5104