Issue 35, 2021

Fermi-level depinning of 2D transition metal dichalcogenide transistors

Abstract

Recently, mainstream silicon (Si)-based materials and complementary metal oxide semiconductor (CMOS) technology have been used in developing extremely tiny sized (of a few nanometers) devices. However, with the reduction of transistor characteristic dimensions, many new challenges such as the short channel effect and high heat dissipation problems have emerged. Two-dimensional transition metal dichalcogenides (2D TMDs) are deemed the most promising semiconductor materials to conquer the challenge of the short channel effect owing to their excellent properties, including high mobility and atomic thickness. Nevertheless, Fermi-level pinning (FLP) occurs when TMDs are in direct contact with metal electrodes, which causes an uncontrollable Schottky barrier and a high contact resistance, limiting the device performance. In this review, we summarize the recent progress on how to circumvent FLP between 2D TMDs semiconductors and metals. Firstly, the related concepts, aiming to get an in-depth understanding of FLP are introduced. Secondly, we discuss the factors contributing to FLP in detail and the strategies of Fermi-level depinning according to these factors. Finally, we present a summary and outlook, which will provide a guideline for suppressing FLP in the process of fabricating high-performance 2D TMD devices.

Graphical abstract: Fermi-level depinning of 2D transition metal dichalcogenide transistors

Article information

Article type
Review Article
Submitted
30 mar 2021
Accepted
02 iyn 2021
First published
02 iyn 2021

J. Mater. Chem. C, 2021,9, 11407-11427

Fermi-level depinning of 2D transition metal dichalcogenide transistors

R. Chen, G. Ding, Y. Zhou and S. Han, J. Mater. Chem. C, 2021, 9, 11407 DOI: 10.1039/D1TC01463C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements