Issue 14, 2021

Micro-pulling-down growth of long YAG- and LuAG-based garnet fibres: advances and bottlenecks

Abstract

New high-energy experiments in colliders have increased the demand for cheap and radiation-hard detector materials that can be mass produced. The concepts of a new generation of high-energy physics experiments include combined electromagnetic and hadron calorimeters for the simultaneous detection of scintillation and Cherenkov emission using undoped and lanthanide-doped crystalline fibres. The micro-pulling-down (μ-PD) method provides the growth of long single crystalline fibres in a ready-to-use shape without the need for further cutting and polishing. In this highlights paper, recent achievements relating to the μ-PD growth of long Y3Al5O12 (YAG)- and Lu3Al5O12 (LuAG)-based fibres from the Institute of Light and Matter are reviewed. Optimization of the Ce concentration, pulling rate, and crystallizer configuration resulted in the formation of highly transparent LuAG:Ce fibres with a light attenuation length of up to 1 m. Meanwhile, such excellent transparency has not been reproduced in YAG:Ce fibers. The main differences in the crystallization processes of YAG- and LuAG-based fibres are discussed in connection with their physical properties. The paper also addresses the codoping of garnet fibres with Mg2+ ions and growth from non-stoichiometric melts to adjust fiber transmission and scintillation performance.

Graphical abstract: Micro-pulling-down growth of long YAG- and LuAG-based garnet fibres: advances and bottlenecks

Article information

Article type
Highlight
Submitted
20 yan 2021
Accepted
04 mar 2021
First published
04 mar 2021

CrystEngComm, 2021,23, 2633-2643

Micro-pulling-down growth of long YAG- and LuAG-based garnet fibres: advances and bottlenecks

O. Sidletskiy, K. Lebbou and D. Kofanov, CrystEngComm, 2021, 23, 2633 DOI: 10.1039/D1CE00091H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements