Issue 2, 2020

Enhanced desalination of electrospun activated carbon fibers with controlled pore structures in the electrosorption process

Abstract

Capacitive deionization (CDI) is a promising ion-separation technology with energy-efficient features for low-salinity desalination. However, the electrosorption capacity limitation is a central challenge due to irregular pore structures and the use of polymer binders in porous carbon electrodes. The aim of this study is to prepare electrospun activated carbon fiber (ACF) webs with well-controlled hierarchical porous structures as high-performance, binder-free electrodes for electrosorption of ions. For characterization of electrospun ACFs, nitrogen adsorption–desorption measurements, Raman spectroscopy, scanning electron microscopy, and cyclic voltammetry tests were carried out. As demonstrated, the electrospun ACFs, prepared from polyacrylonitrile by electrospinning and subsequent oxidation, carbonization, and activation processes with N2/CO2 at 900 °C for 90 min, had a high specific surface area of 1300 m2 g−1 and a 39% increase in mesopores relative to total pore volume. In addition, electrospun ACFs with a high degree of graphitization have good capacitive behaviors for ion storage. As a result of batch-mode CDI experiments at 1.6 V, the electrospun ACFs had a promising electrosorption capacity of 10.53 mg g−1 and good cycling performance. Note that the electrosorption capacity of membrane CDI was three times higher than that of CDI. The significant improvement could be ascribed to the additional interfiber pores, which serve as ion-buffering reservoirs in the electrosorption process. Consequently, by controlling the electrospinning and activation processes without additives, high-performance CDI can be achieved using electrospun ACF electrodes, which have good conductivity and favorable pore structures (e.g., high specific surface area, large pore volume, and enhanced mesoporosity) for the electrosorption of ions.

Graphical abstract: Enhanced desalination of electrospun activated carbon fibers with controlled pore structures in the electrosorption process

Article information

Article type
Paper
Submitted
30 avq 2019
Accepted
07 noy 2019
First published
08 noy 2019

Environ. Sci.: Water Res. Technol., 2020,6, 312-320

Enhanced desalination of electrospun activated carbon fibers with controlled pore structures in the electrosorption process

N. Liu, L. Chen, S. Tsai and C. Hou, Environ. Sci.: Water Res. Technol., 2020, 6, 312 DOI: 10.1039/C9EW00751B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements