Issue 3, 2019

Achievable high Voc of carbon based all-inorganic CsPbIBr2 perovskite solar cells through interface engineering

Abstract

In this work, a simple interface engineering process for SnO2 electron selective layer (ESL) surface passivation employing a SnCl2 solution is introduced, which has successfully reduced the energy loss for a high open-circuit voltage (Voc) output and consequently improved the performance of all-inorganic CsPbIBr2 perovskite solar cells (PSCs). It was found that surface passivation can effectively suppress the recombination process at the interface between the perovskite and SnO2 due to higher recombination resistance. The shorter PL decay time is attributed to the excellent electron extraction from the perovskite film. After optimizing surface passivation, the power conversion efficiency (PCE) was enhanced from 4.73% to 7.00% and a high Voc of 1.31 V was achieved, which is one of the highest Voc values reported for inorganic Cs-based PSCs. More importantly, the passivated SnO2 based device retains 95.5% of its initial performance at 90 °C in air without encapsulation. This work provides a simple and efficient interface engineering method to improve the Voc and efficiency of all-inorganic PSCs.

Graphical abstract: Achievable high Voc of carbon based all-inorganic CsPbIBr2 perovskite solar cells through interface engineering

Supplementary files

Article information

Article type
Paper
Submitted
12 okt 2018
Accepted
28 noy 2018
First published
04 dek 2018

J. Mater. Chem. A, 2019,7, 1227-1232

Achievable high Voc of carbon based all-inorganic CsPbIBr2 perovskite solar cells through interface engineering

Z. Guo, S. Teo, Z. Xu, C. Zhang, Y. Kamata, S. Hayase and T. Ma, J. Mater. Chem. A, 2019, 7, 1227 DOI: 10.1039/C8TA09838G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements