Issue 48, 2018

Direct synthesis of FeS/N-doped carbon composite for high-performance sodium-ion batteries

Abstract

Fe-based sulfides have received tremendous attention as promising anode materials for sodium ion batteries (SIBs) owing to their advantages of abundant resources, high theoretical specific capacity, and environmental benignity. However, unsatisfactory electronic conductivity and severe volume change during the cycling process limit their applications. Here, an FeS/N-doped carbon composite (FeS/NC) is designed and prepared through an in situ chemical transformation method via pyrolyzing a mixture of Fe(NO3)3 and urea followed by sulfidation. The individual FeS nanoparticles are coated by the in situ formed nitrogen-doped carbon and then embedded in the ultrathin carbon sheets. When evaluated as an anode material for SIBs, the composite delivered a high charge capacity of 511 mA h g−1 after 100 cycles at 200 mA g−1, 326 mA h g−1 after 500 cycles at 1.0 A g−1, and exhibited a superior rate performance of 260 mA h g−1 at 4.0 A g−1. This good electrochemical performance of the FeS/NC can be ascribed to the in situ carbon-coating effectively alleviating the volume change of FeS particles during the cycling process and the interconnected ultrathin carbon sheets enhancing the electronic conductivity of the ensemble.

Graphical abstract: Direct synthesis of FeS/N-doped carbon composite for high-performance sodium-ion batteries

Supplementary files

Article information

Article type
Communication
Submitted
03 sen 2018
Accepted
16 noy 2018
First published
19 noy 2018

J. Mater. Chem. A, 2018,6, 24702-24708

Direct synthesis of FeS/N-doped carbon composite for high-performance sodium-ion batteries

Y. Liu, W. Zhong, C. Yang, Q. Pan, Y. Li, G. Wang, F. Zheng, X. Xiong, M. Liu and Q. Zhang, J. Mater. Chem. A, 2018, 6, 24702 DOI: 10.1039/C8TA08562E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements