Issue 2, 2017

Microanalysis of arsenic in solid samples by laser ablation-atomic fluorescence spectrometry

Abstract

A spot mode-LA-AFS method has been developed for localised microanalysis of arsenic in biological tissues. The cool argon–hydrogen–air diffusion flame in the detector is able to effectively decompose LA-generated aerosol particles and atomise arsenic for fluorescence detection. After optimisation of the critical LA-AFS parameters through ablation of standards based on cellulose-based filters loaded with various arsenic species, the method was validated by comparison with LA-ICP-MS through measurement of arsenic in the leaflets of the arsenic-hyperaccumulating Chinese ladder brake fern Pteris vittata L. Both methods yielded very similar arsenic concentrations associated with parts of the leaflets. The performance characteristics of the LA-AFS method were as follows: sensitivity, 0.01 mV μg−1 g; detection limit (3× standard deviation of the noise), 11 μg g−1, or, in absolute terms, 30 pg of ablated arsenic; analysis time, ca. 1 min per spot; linearity, 0–40 mg g−1.

Graphical abstract: Microanalysis of arsenic in solid samples by laser ablation-atomic fluorescence spectrometry

Article information

Article type
Paper
Submitted
21 sen 2016
Accepted
22 noy 2016
First published
22 noy 2016

J. Anal. At. Spectrom., 2017,32, 299-304

Microanalysis of arsenic in solid samples by laser ablation-atomic fluorescence spectrometry

Z. Šlejkovec, J. T. van Elteren, V. S. Šelih, M. Šala and W. T. Corns, J. Anal. At. Spectrom., 2017, 32, 299 DOI: 10.1039/C6JA00344C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements