Issue 19, 2016

Novel 1.5 V anode materials, ATiOPO4 (A = NH4, K, Na), for room-temperature sodium-ion batteries

Abstract

Due to the abundance of sodium in nature, sodium-ion batteries (SIBs) have attracted widespread attention. Numerous intercalated cathode materials have already been reported, but fewer intercalated anode materials are known. Among these materials, most anodes suffer from low coulombic efficiency and the dendritic growth of sodium due to the lower sodiated voltages (below 1.0 V). To improve the safety performance of batteries, exploring new anode materials which have higher sodiated voltage above 1.0 V is very important. Herein, a series of novel intercalated anode materials, ATiOPO4 (A = NH4, K, Na), is introduced for SIBs at the first time. Preparation of NaTiOPO4 by a traditional solid-state reaction is difficult. So we first synthesized NH4TiOPO4 (NTP) by a simple hydrothermal reaction, KTiOPO4 (KTP) and NaTiOPO4 (NaTP) were each prepared by ion exchange with the respective nitrate. These samples were investigated by electrochemical discharge/charge which showed average sodiated voltages of 1.45 V (NTP), 1.4 V (KTP) and 1.5 V (NaTP); respectively. In situ XRD results indicated that a two-phase reaction mechanism accompanies electrochemical Na insertion/extraction in NaTP. These anode materials are potential candidates for developing SEI-free and high safety SIBs.

Graphical abstract: Novel 1.5 V anode materials, ATiOPO4 (A = NH4, K, Na), for room-temperature sodium-ion batteries

Supplementary files

Article information

Article type
Communication
Submitted
29 yan 2016
Accepted
16 apr 2016
First published
27 apr 2016

J. Mater. Chem. A, 2016,4, 7141-7147

Novel 1.5 V anode materials, ATiOPO4 (A = NH4, K, Na), for room-temperature sodium-ion batteries

L. Mu, L. Ben, Y. Hu, H. Li, L. Chen and X. Huang, J. Mater. Chem. A, 2016, 4, 7141 DOI: 10.1039/C6TA00891G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements