Issue 7, 2016

Interfacial construction of Li2O2 for a performance-improved polymer Li–O2 battery

Abstract

Compared with conventional nonaqueous Li–O2 batteries using organic liquid electrolytes, polymer Li–O2 batteries have been considered as ideal alternatives based on the consideration of safety issues. However, high interfacial resistances and severe overpotential build-up during cycling remain unsolved problems for their future application. Much less attention has been devoted to the interfacial chemistries in polymer Li–O2 batteries. In this study, interfacial engineering was elaborately carried out for the design and construction of a Li–O2 battery with the aim of decreasing the overpotential and achieving a highly efficient polymer Li–O2 battery. A dramatically decreased overpotential (terminal voltage of charge lower than 4 V vs. Li/Li+) was obtained in a polymer Li–O2 battery assembled with a stable redox mediator decorated polymer electrolyte and a high catalytic RuO2@reduced graphene oxide based cathode for the first time. The feasibility study demonstrated that interfacial construction could be used as a promising alternative strategy for the development of a polymer Li–air battery.

Graphical abstract: Interfacial construction of Li2O2 for a performance-improved polymer Li–O2 battery

Supplementary files

Article information

Article type
Communication
Submitted
19 dek 2015
Accepted
07 yan 2016
First published
11 yan 2016

J. Mater. Chem. A, 2016,4, 2403-2407

Interfacial construction of Li2O2 for a performance-improved polymer Li–O2 battery

J. Yi, S. Wu, S. Bai, Y. Liu, N. Li and H. Zhou, J. Mater. Chem. A, 2016, 4, 2403 DOI: 10.1039/C5TA10436J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements