Issue 11, 2013

Transparent, stretchable, carbon-nanotube-inlaid conductors enabled by standard replication technology for capacitive pressure, strain and touch sensors

Abstract

This paper describes a standard replication approach for preparing transparent elastomeric conductors with single-walled carbon nanotubes (SWCNTs) inlaid just below the surface. The elastic conductors were fabricated by spray coating a SWCNT suspension in chloroform on a fluorinated substrate, followed by the standard replication, casting liquid elastomers like polydimethylsiloxane on the SWCNT film, curing and peeling off the substrate. The replication strategy can produce elastic conductors with a flat or a desirable patterned surface. The resultant elastic conductors had excellent stability under repeated mechanical loading and stretchability up to 300%. It retained conductance even after 10 tape tests. Using the SWCNT-inlaid stretchable conductors as electrodes, elastic capacitors were fabricated using a mask-assisted method. The results showed that these capacitors are good candidates for multi-functional capacitive pressure, strain, and touch sensors.

Graphical abstract: Transparent, stretchable, carbon-nanotube-inlaid conductors enabled by standard replication technology for capacitive pressure, strain and touch sensors

Supplementary files

Article information

Article type
Paper
Submitted
07 yan 2013
Accepted
25 yan 2013
First published
25 yan 2013

J. Mater. Chem. A, 2013,1, 3580-3586

Transparent, stretchable, carbon-nanotube-inlaid conductors enabled by standard replication technology for capacitive pressure, strain and touch sensors

X. Wang, T. Li, J. Adams and J. Yang, J. Mater. Chem. A, 2013, 1, 3580 DOI: 10.1039/C3TA00079F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements