Issue 2, 2024

An ambient process for hole transport layer-free highly stable MAPbI3 by addition of MACl for efficient perovskite solar cells

Abstract

Methylammonium lead iodide (MAPbI3) is a front-runner material for efficient perovskite solar cells (PSCs) due to its high light-absorption coefficient, suitable bandgap, and superior charge carrier mobility. However, high-quality photoactive MAPbI3 (MAPI) perovskite thin-films are usually fabricated in controlled atmospheric conditions (inside a glove box) and annealed at high temperature (generally >120 °C for 20 min). Here, we report a facile method to fabricate high quality MAPbI3 (MAPI) thin-films by the simple addition of an MA-based volatile additive, i.e., methylammonium chloride (MACl). The optimized amount of MACl in the perovskite solution produced a highly crystalline and optically active MAPI black perovskite phase at room temperature under ambient atmospheric conditions. MACl not only regulates the surface morphology of the perovskite films, but also the intermediate phases by altering the formation energy of the perovskite material. MACl lowered the formation energy of the MAPI perovskite resulting in the room temperature formation of phase pure MAPI perovskite under ambient conditions. Finally, we assembled perovskite solar cell devices with an HTL-free carbon-based architecture to determine the photovoltaic performance of the prepared thin-films. Our champion device showed a power conversion efficiency as high as 7.11% with an open circuit voltage of 0.98 V, short circuit current density of 11.03 mA cm−2 and a fill-factor of 65.86%. The device was stable over 10 days under ambient conditions and retained ∼80% of its initial efficiency. These results are favourable for large-scale fabrication to make it commercially viable.

Graphical abstract: An ambient process for hole transport layer-free highly stable MAPbI3 by addition of MACl for efficient perovskite solar cells

Supplementary files

Article information

Article type
Paper
Submitted
10 okt 2023
Accepted
26 dek 2023
First published
02 yan 2024
This article is Open Access
Creative Commons BY-NC license

Energy Adv., 2024,3, 442-450

An ambient process for hole transport layer-free highly stable MAPbI3 by addition of MACl for efficient perovskite solar cells

P. Nandigana, B. Saminathan, S. P., S. D., I. A. M., R. P. R., B. Subramanian and S. K. Panda, Energy Adv., 2024, 3, 442 DOI: 10.1039/D3YA00500C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements