Issue 22, 2024

Insights from experiment and machine learning for enhanced TiO2 coated glazing for photocatalytic NOx remediation

Abstract

In this study, 58 distinct TiO2-coated glass samples were synthesized via Atmospheric Pressure Chemical Vapour Deposition (APCVD) under controlled synthesis conditions. The crystal properties, optical properties, surface properties and photogenerated charge carrier behaviour of all synthesized samples were characterized by X-ray diffraction (XRD), UV-visible spectroscopy, atomic force microscopy (AFM), and transient absorption spectroscopy (TAS), respectively. The photocatalytic activity of all coatings was systematically assessed against NO gas under near-ISO (22 197-1:2016) test conditions. The most active TiO2 coating showed ∼22.3% and ∼6.6% photocatalytic NO and NOx conversion efficiency, respectively, with this being ∼60 times higher than that of a commercial self-cleaning glass. In addition, we compared the accuracy of different machine learning strategies in predicting photocatalytic oxidation performance based on experimental data. The errors of the best strategy for predicting NO and NOx removal efficiency on the entire data set were ±2.20% and ±0.92%, respectively. The optimal ML strategy revealed that the most influential factors affecting NO photocatalytic efficiency are the sample surface area and photogenerated charge carrier lifetime. We then successfully validated our ML predictions by synthesising a new, high-performance TiO2-coated glass sample in accordance with our ML simulated data. This sample performed better than commercially available self-cleaning glass under a new metric, which comprehensively considered the visible light transmittance (VLT), NO degradation rate and NO2 selectivity of the material. Not only did this research provide a panoramic view of the links between synthesis parameters, physical properties, and NOx removal performance for TiO2-coated glass, but also showed how ML strategies can guide the future design and production of more effective photocatalytic coatings.

Graphical abstract: Insights from experiment and machine learning for enhanced TiO2 coated glazing for photocatalytic NOx remediation

Supplementary files

Article information

Article type
Paper
Submitted
26 fev 2024
Accepted
05 apr 2024
First published
10 may 2024
This article is Open Access
Creative Commons BY license

J. Mater. Chem. A, 2024,12, 13281-13298

Insights from experiment and machine learning for enhanced TiO2 coated glazing for photocatalytic NOx remediation

Z. Lin, Y. Li, S. A. Haque, A. M. Ganose and A. Kafizas, J. Mater. Chem. A, 2024, 12, 13281 DOI: 10.1039/D4TA01319K

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements