Issue 5, 2024

Rapid carbothermal shocking fabrication of iron-incorporated molybdenum oxide with heterogeneous spin states for enhanced overall water/seawater splitting

Abstract

Molybdenum dioxide (MoO2) has been considered as a promising hydrogen evolution reaction (HER) electrocatalyst. However, the active sites are mainly located at the edges, resulting in few active sites and poor activity in the HER. Herein, we first reported on an efficient strategy to incorporate Fe into MoO2 nanosheets on Ni foam (Fe–MoO2/NF) using a rapid carbothermal shocking method (820 °C for 127 s). Notably, the different spin states between Fe and Mo atoms could lead to rich lattice dislocations in Fe–MoO2/NF, exposing abundant oxygen vacancies and the low-oxidation-state of Mo sites during the rapid Joule heating process. As tested, the catalyst exhibited superior activity with ultralow overpotentials (HER: 17 mV@10 mA cm−2; oxygen evolution reaction (OER): 310 mV@50 mA cm−2) and high OER selectivity in alkaline seawater splitting. Meanwhile, this catalyst was equipped in a home-made anion exchange membrane (AEM) seawater electrolyzer, which achieved a low energy consumption (5.5 kW h m−3). More importantly, Fe–MoO2/NF also coupled very well with a solar-driven electrolytic system and turned out a solar-to-hydrogen (STH) efficiency of 13.5%. Theoretical results also demonstrated that Fe incorporated and abundant oxygen vacancies in MoO2 can distort the distance of the Mo–O bonds and regulate the electronic structure, thus optimizing the binding energy of H*/OOH* adsorption. This method can be extended to other heterogeneous spin states in MoO2-based catalysts (e.g. Ni–MoO2/NF, Co–MoO2/NF) for seawater splitting, and provide a simple, efficient and universal strategy to prepare highly-efficient MoO2-based electrocatalysts.

Graphical abstract: Rapid carbothermal shocking fabrication of iron-incorporated molybdenum oxide with heterogeneous spin states for enhanced overall water/seawater splitting

  • This article is part of the themed collection: #MyFirstMH

Supplementary files

Article information

Article type
Communication
Submitted
22 okt 2023
Accepted
13 dek 2023
First published
14 dek 2023

Mater. Horiz., 2024,11, 1199-1211

Rapid carbothermal shocking fabrication of iron-incorporated molybdenum oxide with heterogeneous spin states for enhanced overall water/seawater splitting

J. Sun, S. Qin, Z. Zhao, Z. Zhang and X. Meng, Mater. Horiz., 2024, 11, 1199 DOI: 10.1039/D3MH01757E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements