Issue 12, 2023

Assessing sources and fractions of metals associated with environmental plastics: a case study in Lake Como (Italy)

Abstract

Understanding plastic–metal interactions is paramount to unveil the ecological risks of plastic pollution. Besides including a (variable) amount of metal-containing additives, plastic objects can adsorb metals on their surface in the environment. This work aims at measuring and assessing the possible origin of metals in environmental plastics deposited along the shores of Lake Como (Italy). Samples were characterized through Fourier-transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and water contact angle. Then, the total metal load was analysed by acid digestion. Surface extraction with nitric acid was also performed to detect labile metals and a three-step extraction scheme enabled the determination of physisorbed, carbonate-bonded and organic matter-bonded metals, respectively. Eighteen metals (Al, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Sr, Ag, Cd, Sn, Ba, Pb and U) were analysed in total. Newly produced plastic items were also analysed as a reference. Our findings revealed that environmental samples retained a higher concentration of metals compared to virgin ones, especially in the loosely bonded acid-extractable fractions, indicating their potential bioavailability. The source of metals on plastics was extremely variable: some metals were predominantly sorbed from the environment (e.g., Mn and Pb), and others were mainly leached from the plastic matrix (Ba, Cu and Ti) or had a mixed origin (Zn, Fe, Sn, Sr and Al). This work shed light on the changes in bioavailability of metals induced by plastic environmental ageing, set baseline values for a freshwater site, and provided insights into the potential bioavailability exerted by metals associated with plastic litter.

Graphical abstract: Assessing sources and fractions of metals associated with environmental plastics: a case study in Lake Como (Italy)

Supplementary files

Article information

Article type
Paper
Submitted
31 avq 2023
Accepted
05 noy 2023
First published
06 noy 2023
This article is Open Access
Creative Commons BY license

Environ. Sci.: Adv., 2023,2, 1746-1756

Assessing sources and fractions of metals associated with environmental plastics: a case study in Lake Como (Italy)

S. Carnati, A. Pozzi, D. Spanu, D. Monticelli, R. Bettinetti, G. Boldrocchi, L. Nizzetto and G. Binda, Environ. Sci.: Adv., 2023, 2, 1746 DOI: 10.1039/D3VA00254C

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements