Issue 22, 2023

3D light-curing printing to construct versatile octopus-bionic patches

Abstract

Reliable, fast and switchable gluing modes are critically important in medical adhesives and intelligent climbing robot applications. The octopus-bionic patch has attracted the attention of many scholars. The suction cup structure of the octopus achieves adhesion through differential pressure, showing strong adhesion in both dry and wet environments. However, the construction of the octopus-bionic patch remains limited in terms of adaptability, personalization and mass production. Herein, a composite hydrogel consisting of gelatin methacryloyl (GelMA), polyethylene glycol diacrylate (PEGDA) and acrylamide (AAM) was developed, and a structure mimicking the octopus sucker was constructed by digital light processing (DLP). The obtained octopus-bionic patch has strong adhesion, good biocompatibility and multi-functionality. Compared with the template method in most studies, the octopus-bionic patch constructed by the DLP printing method has the advantages of customizability and low cost. In addition, the DLP printing method endows the patch surface with an octopus-like groove structure for a better bionic effect.

Graphical abstract: 3D light-curing printing to construct versatile octopus-bionic patches

Supplementary files

Article information

Article type
Paper
Submitted
20 mar 2023
Accepted
09 may 2023
First published
11 may 2023

J. Mater. Chem. B, 2023,11, 5010-5020

3D light-curing printing to construct versatile octopus-bionic patches

W. Li, X. Hu, H. Liu, J. Tian, L. Li, B. Luo, C. Zhou and L. Lu, J. Mater. Chem. B, 2023, 11, 5010 DOI: 10.1039/D3TB00590A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements