Issue 38, 2023

Delivering low-energy carbon capture with photo-responsive hypercrosslinked polymers derived from polystyrene waste

Abstract

Highly effective but energy-intensive techniques such as temperature and pressure swing adsorption are typically deployed to regenerate adsorbents used in carbon capture. Here we show that the energy consumption and costs associated with adsorbent regeneration can be reduced by 500-fold when photo-responsive hypercrosslinked polymers (HCPs) recycled from waste expanded polystyrene that are loaded with 8.9 wt% of azobenzene are deployed for carbon capture. Our approach uses UV light (365 nm) to enhance the adsorption of CO2 from a variety of mixed gas concentrations with CO2 content between 1–40 v/v%. 14% of CO2 adsorbed on HCPs@Azo can be desorbed by irradiation with visible light. The photo-regeneration efficiency of adsorption and desorption capacities of HCPs@Azo stabilised at 50% after 5 cycles, demonstrating good reusability. The low energy footprints and synthesis and operating costs of our photo-responsive HCPs@Azo can potentially reduce carbon capture costs and establish a green carbon capture process driven by light.

Graphical abstract: Delivering low-energy carbon capture with photo-responsive hypercrosslinked polymers derived from polystyrene waste

Supplementary files

Article information

Article type
Paper
Submitted
31 iyl 2023
Accepted
11 sen 2023
First published
14 sen 2023
This article is Open Access
Creative Commons BY-NC license

J. Mater. Chem. A, 2023,11, 20559-20567

Delivering low-energy carbon capture with photo-responsive hypercrosslinked polymers derived from polystyrene waste

A. Liu, G. Lu, X. Fan and C. H. Lau, J. Mater. Chem. A, 2023, 11, 20559 DOI: 10.1039/D3TA04553F

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements