Issue 21, 2023

A conformal van der Waals graphene coating enabled high-performance piezo-ionic sensor for spatial, gesture, and object recognition

Abstract

Transforming mechanical forces into electrical signals is vital in self-powered strain sensors. Compared to piezoelectric materials, piezo-ionic materials show great potential in self-powered strain sensors because of the passive and direction identification characteristics arising from the ion gradient under pressure. However, the low signal output (less than 5 mV) of piezo-ionic sensors might be influenced by the bioelectricity when used in practical applications. In addition, the normally used metal electrodes face fracture under high and long-term strain. Here, we used a dry coating method to prepare highly conformal, highly electrically conductive (minimum sheet resistance of 16 ohm sq−1), and highly deformed graphene electrodes with a van der Waals (vdW) structure. Such conformal vdW graphene (vdWGR) electrodes could enhance the signal output to 90.3 mV and resist a large strain of 50% bending variation with 10 000 cycles, avoiding bioelectricity interference and electrode fracture during use. Interestingly, the vdWGR-assisted piezo-ionic sensor exhibited a special “bouncing back” peak when touched by soft objects, which could be utilized for object recognition. We demonstrated its applications in spatial, gesture, and object recognition by utilizing the piezo-ionic strain sensor's differences in the peak value, directionality, and shapes. The preparation method for high-performance vdW graphene electrodes can be extended to other flexible electrodes or electronics. Besides, the piezo-ionic effect identifying the softness or hardness of objects might assist piezo-ionic sensors in more applications.

Graphical abstract: A conformal van der Waals graphene coating enabled high-performance piezo-ionic sensor for spatial, gesture, and object recognition

Supplementary files

Article information

Article type
Paper
Submitted
12 yan 2023
Accepted
14 apr 2023
First published
25 apr 2023

J. Mater. Chem. A, 2023,11, 11288-11297

A conformal van der Waals graphene coating enabled high-performance piezo-ionic sensor for spatial, gesture, and object recognition

Z. Li, A. Balilonda, W. Mei, W. Li and W. Chen, J. Mater. Chem. A, 2023, 11, 11288 DOI: 10.1039/D3TA00215B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements