Issue 19, 2023

Photoactive and conductive biohybrid films by polymerization of pyrrole through voids in photosystem I multilayer films

Abstract

The combination of conducting polymers with electro- and photoactive proteins into thin films holds promise for advanced energy conversion materials and devices. The emerging field of protein electronics requires conductive soft materials in a composite with electrically insulating proteins. The electropolymerization of pyrrole through voids in a drop-casted photosystem I (PSI) multilayer film enables the straightforward fabrication of photoactive and conductive biohybrid films. The rate of polypyrrole (PPy) growth is reduced by the presence of the PSI film but is insensitive to its thickness, suggesting that rapid diffusion of pyrrole through the voids within the PSI film enables initiation at vacant areas on the gold surface. The base thickness of the composite tends to increase with time, as PPy chains propagate through and beyond the PSI film, coalescing to exhibit a tubule-like morphology as observed by scanning electron microscopy. Increasing amounts of PPy greatly increase the capacitance of the composite films in a manner almost identical to that of pure PPy films grown from unmodified gold, consistent with a high polymer/aqueous interfacial area and a conductive composite film. While PPy is not photoactive here, all composite films, including those with large amounts of PPy, exhibit photocurrents when irradiated by white light in the presence of redox mediator species. Optimization of the Py electropolymerization time is necessary, as increasing amounts of PPy lead to decreased photocurrent density due to a combination of light absorbance by the polymer and reduced accessibility of redox species to active PSI sites.

Graphical abstract: Photoactive and conductive biohybrid films by polymerization of pyrrole through voids in photosystem I multilayer films

Supplementary files

Article information

Article type
Paper
Submitted
23 may 2023
Accepted
25 avq 2023
First published
26 avq 2023
This article is Open Access
Creative Commons BY license

Nanoscale Adv., 2023,5, 5301-5308

Photoactive and conductive biohybrid films by polymerization of pyrrole through voids in photosystem I multilayer films

J. M. Passantino, B. A. Christiansen, M. A. Nabhan, Z. J. Parkerson, T. D. Oddo, D. E. Cliffel and G. K. Jennings, Nanoscale Adv., 2023, 5, 5301 DOI: 10.1039/D3NA00354J

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements