Issue 1, 2023

A high-temperature sintered cassiterite reference material for in situ determination of Sn isotope ratios

Abstract

Microanalysis of tin isotopes in cassiterite by laser ablation multi-collector inductively coupled plasma mass spectrometry (LA-MC-ICP-MS) has been an important tool to reconstruct the fluid evolution or discriminate petrological sources and processes. However, it is a major challenge to prepare the absolutely essential cassiterite reference material that has a homogeneous Sn isotope composition on a micron scale. In this study, we report a novel method to synthesize a homogeneous cassiterite reference material via sintering a micrometer powder. Under the optimized conditions (600 °C, 1 GPa), the synthesized cassiterite has a smooth surface and dense structure that is suitable for laser ablation analysis. The Sn signal for the synthesized cassiterite was consistent with that of natural cassiterite and lower than that of the pressed powder pellets by LA-ICP-MS, indicating that the sintered cassiterite approximated the theoretical maximal density. LA-MC-ICP-MS measurements suggest that the homogeneity (2SD) for δ124Sn/120Sn was improved from 0.64‰ (original cassiterite crystal) to 0.10‰ (synthesized cassiterite). The reproducibility of δ124Sn/120Sn was 0.07‰ (2SD) for the synthesized cassiterite. These data have demonstrated that the synthesized cassiterite has a homogeneous distribution of Sn isotopes. Therefore, we recommend combining ultra-fine powders with the high-temperature sintering technique to synthesize other minerals for microanalysis.

Graphical abstract: A high-temperature sintered cassiterite reference material for in situ determination of Sn isotope ratios

Supplementary files

Article information

Article type
Paper
Submitted
09 noy 2022
Accepted
24 noy 2022
First published
06 dek 2022

J. Anal. At. Spectrom., 2023,38, 204-211

A high-temperature sintered cassiterite reference material for in situ determination of Sn isotope ratios

D. Zhang, Z. Bao, P. Liu, G. Brügmann, W. Yang, K. Chen, P. Liang and H. Yuan, J. Anal. At. Spectrom., 2023, 38, 204 DOI: 10.1039/D2JA00362G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements